Samsung SND-7082F Check Data & Time settings, Checked to use, When I don’t use Motion, Generated

appendix

PROBLEM		SOLUTION
<Motion detection / Video	y Verify the settings in the following sequence:
analytics> of <Event setup> is set		A. Check <Data & Time> settings.
to <Enable>, but no notification		B. The <Motion detection / Video analytics> should be set to <Enable>.
e-mail reaches me even when an		C. Check if the <E-mail> option of <Event action setup> menu is
analysis event had occurred.		checked to use.
Can I define event rules even	y	Yes, it can be. You can set rules for events despite of the intelligent
when I don’t use <Motion
detection / Video analytics>?		video analysis setting.
No signal is found at the Alarm
Output port even when an	y	Check alarm output port settings.
intelligent video analysis event is
generated.
Cannot record into the SD memory	y Check if the memory card is defective.
card.	y Check if the write protection tab of the memory card is set to “LOCK”.
SD memory card is inserted but	y Check if the memory card is inserted in the proper direction. Operation
		of memory card that is formatted by other devices is not guaranteed with
the camera does not operate		this camera unit
properly.	y Format the memory card again in <Setup>  <Event>  <Storage>
		menu.
Cannot format the SD memory	y	Check if the write protection tab of the memory card is set to “LOCK”.
card.

134_ appendix