Bolens 462 Thru 465 manual OFF-SEASON Storage, Trouble Shooting Guide

Page 12

11.When reassembling the blade, tighten center bolt to between 550 and 650 inch-pounds and the two outer bolts to between 250 and 350 inch-pounds, or lacking torque wrench, tighten securely.

1.Insert screw driver through hole

2. Blade should be parallel to ground

Screw

DriverBlade

Ground

Figure 10

SECTION 10: OFF-SEASON STORAGE

Prepare your chipper-shredder for storage at the end of the season or if the unit will not be used for 30 days or more. The following steps should be taken to prepare your shredder for storage.

1.Clean and lubricate the shredder thoroughly.

2.Refer to engine manual for correct engine storage instructions.

3.If storing an unventilated or metal storage shed, coat metal parts with a light oil or silicone to prevent rust.

4.Store in a cool dry place. Do not store next to corrosive materials such as fertilizer.

SECTION 11: TROUBLE SHOOTING GUIDE

Trouble

Possible Cause(s)

Corrective Action

 

 

 

Engine fails to start

Dirty air cleaner.

Refer to the engine manual packed with your unit.

 

Choke not in ON position.

Move switch to ON position.

 

Spark plug wire disconnected.

Connect wire to spark plug.

 

Cannot pull recoil cord.

Obstruction lodged in impeller. Stop immediately and

 

 

disconnect spark plug wire. Remove lodged object.

 

Fuel tank empty, or stale fuel.

Fill tank with clean, fresh gasoline. Fuel will not last

 

 

over thirty days unless a fuel stabilizer is used.

 

Fuel shut-off valve closed (if so

Open fuel shut-off valve.

 

equipped).

 

 

Faulty spark plug.

Clean, adjust gap or replace.

Loss of power; operation

Spark plug wire loose.

Connect and tighten spark plug wire.

erratic

Unit running on CHOKE.

Move choke lever to OFF position.

 

Blocked fuel line or stale fuel.

Clean fuel line; fill tank with clean, fresh gasoline. Fuel

 

 

will not last over thirty days unless a fuel stabilizer is

 

 

used.

 

Water or dirt in fuel system.

Disconnect fuel line at carburetor to drain fuel tank.

 

 

Refill with fresh fuel.

 

Carburetor out of adjustment.

Refer to the engine manual packed with your unit.

 

Dirty air cleaner.

Refer to the engine manual packed with your unit.

Engine overheats

Carburetor not adjusted properly.

Refer to the engine manual packed with your unit.

 

Dirty air cleaner.

Refer to the engine manual packed with your unit.

 

Engine oil level low.

Fill crankcase with proper oil.

Too much vibration

Loose parts or damaged

Stop engine immediately and disconnect spark plug

 

impeller.

wire. Have unit serviced by an authorized service

 

 

dealer.

Unit does not discharge

Discharge chute clogged.

Stop engine immediately and disconnect spark plug

 

 

wire. Clean flail screen and inside of housing. See

 

 

Maintenance section of this manual.

 

Low engine RPM.

Always run engine at full throttle

 

Foreign object lodged in

Stop engine immediately and disconnect spark plug

 

impeller.

wire. Remove lodged object.

Rate of discharge slows

Low engine RPM.

Always run engine at full throttle

considerably or composition

Shredding blade and/or chipper

Replace shredding and chipper blades or see your

of discharged material

blades dull.

authorized service dealer.

changes

 

 

Note: For repairs beyond the minor adjustments above, contact your local authorized service dealer.

12

Image 12
Contents Important Read Safety Rules and Instructions Carefully MTD Products INC. P.O. BOX 368022 CLEVELAND, OhioImportant Safe Operation Practices General OperationService ChildrenSafety Labels Found on Your Unit To Avoid Serious InjuryFinding Your Model Number Calling Customer SupportUnpacking Instructions Remove Unit from CartonSET-UP Instructions Start with to set-up you new chipper shredderAll models See FigureALL Models FrameControls Stopping EngineGasoline and OIL FILL-UP Starting EngineMaintenance AIR Cleaner Engine OILSpark Plug CarburetorModel 465A only Sharpening or Replacing the Shredder BladeTrouble Shooting Guide OFF-SEASON StorageTrouble Possible Causes Corrective Action Illustrated Parts List TOW Hitch KIT Model Number For Models 462B, 463C, 465AModel 462B, 463C, 465A 742-0571 Blade MANUFACTURER’S Limited Warranty for Other Warranties

462 Thru 465 specifications

The Bolens 462 through 465 series represents a significant advancement in the realm of garden tractors, embodying a blend of rugged durability and innovative technology. Designed for both residential and light commercial use, these compact tractors showcase an array of features that enhance their appeal among gardening enthusiasts and landscapers alike.

One of the standout characteristics of the Bolens 462 to 465 models is their robust engine lineup. Equipped with powerful air-cooled, four-stroke engines, these tractors deliver reliable performance whether handling simple lawn care tasks or more demanding garden work. This power is complemented by a smooth hydrostatic transmission, allowing for seamless speed adjustments and ease of operation, making it ideal for navigating tight spaces and varied terrains.

The design of these tractors reflects a commitment to user comfort and ergonomic operation. The adjustable seat offers excellent support, while the intuitive control layout enables operators to easily reach all functions without unnecessary strain. Additionally, features like power steering ensure that maneuvers are smooth and fatigue is minimized during extended use.

When it comes to versatility, the Bolens 462 through 465 excel, with several optional attachments available, including mowing decks, snow throwers, and tillers. This adaptability makes them suitable for year-round use, allowing users to tackle a wide range of tasks from mowing adjacent lawns to snow removal in the winter months.

Another key feature of these tractors is their durable construction. Built with a strong steel frame and quality components, the Bolens series is designed to withstand the rigors of outdoor work. The wider wheelbase provides stability, especially when operating on uneven ground, ensuring a comfortable experience even in challenging conditions.

Technologically, these models integrate user-friendly features such as easy-to-read dashboards that display essential information like fuel levels and engine performance. Maintenance is also simplified through easily accessible components, allowing for quicker service and upkeep.

In summary, the Bolens 462 through 465 series exemplifies the perfect intersection of power, versatility, and user comfort. With a focus on reliability and innovative design, these tractors are more than capable of meeting the demands of today’s gardeners and landscapers while providing an enjoyable user experience.