Bolens 462 Thru 465 manual Children, Service

Page 3

If the cutting mechanism strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately stop the engine and allow the machine to come to a complete stop. Disconnect the spark plug wire and move it away from the spark plug. Take the following steps.

Inspect for damage.

Repair or replace any damaged parts.

Check for any loose parts and tighten to assure continued safe operation.

Never attempt to attach or remove catcher bag when engine is running. Shut the engine off and wait for the impeller to come to a complete stop. The impeller continues to rotate for a few seconds after the engine is shut off. Never place any part of the body in the impeller area until you are sure the impeller has stopped rotating.

Muffler and engine become hot and can cause a burn. Do not touch.

Do not allow leaves or other debris to build up on engine's muffler. The debris could ignite and cause a fire.

Do not attempt to shred or chip material larger than specified in this manual. Personal injury or damage to the machine could result.

Do not operate engine if air cleaner or cover over carburetor air intake is removed, except for adjustment. Removal of such parts could create a fire hazard.

Only use accessories approved for this machine by the manufacturer. Read, understand, and follow all instructions provided with the approved accessory.

If situations occur which are not covered by this manual, use care and good judgment. Contact your dealer for assistance.

Keep discharge chute deflector, chipper chute door, and all other guards and safety devices in place and operating properly.

Only operate unit in good daylight. Do not operate unit at night or in dark areas where your vision may be impaired.

2.CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of small children. Children are often attracted to the chipper-shredder and the chipping and shredding activity. Never assume that children will remain where you last saw them.

Keep children out of the work area and under the watchful eye of a responsible adult other than the operator.

Be alert and turn the unit off if a child enters the area.

Never allow children under the age of 16 to operate the chipper-shredder.

3.SERVICE

Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive.

Store fuel and oil in approved containers, away from heat and open flame, and out of the reach of children. Check and add fuel before starting the engine. Never remove gas cap or add fuel while the engine is running. Allow engine to cool at least two minutes before refueling.

Replace gasoline cap securely and wipe off any spilled gasoline before starting the engine as it may cause a fire or explosion.

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Never refuel unit indoors because flammable vapors will accumulate in the area.

Never store the machine or fuel container inside where there is an open flame or spark such as a gas hot water heater, space heater, clothes dryer or furnace.

Never run your machine in an enclosed area as the exhaust from the engine contains carbon monoxide, which is an odorless, tasteless and deadly poisonous gas.

To reduce fire hazard, keep engine and muffler free of leaves, grass, and other debris build-up. Clean up fuel and oil spillage. Allow unit to cool at least 5 minutes before storing.

Before cleaning, repairing, or inspecting, make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and keep wire away from spark plug to prevent accidental starting. Do not use flammable solutions to clean air filter.

Check the blade and engine mounting screws at frequent intervals for proper tightness. Also visually inspect blades for wear and/or damage (e.g., bent, cracked). Replace with blades which meet original equipment specifications.

Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly.

After striking a foreign object, immediately stop the engine, disconnect the spark plug wire from the spark plug, and thoroughly inspect the unit for any damage. Repair damage before starting and operating unit.

Do not alter or tamper with the engine's governor setting. The governor controls the maximum safe operating speed of the engine. Overspeeding the engine is dangerous and will cause damage to the engine and to other moving parts of the machine.

WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

3

Image 3
Contents MTD Products INC. P.O. BOX 368022 CLEVELAND, Ohio Important Read Safety Rules and Instructions CarefullyGeneral Operation Important Safe Operation PracticesChildren ServiceTo Avoid Serious Injury Safety Labels Found on Your UnitRemove Unit from Carton Finding Your Model NumberCalling Customer Support Unpacking InstructionsSee Figure SET-UP InstructionsStart with to set-up you new chipper shredder All modelsFrame ALL ModelsStarting Engine ControlsStopping Engine Gasoline and OIL FILL-UPMaintenance Carburetor AIR CleanerEngine OIL Spark PlugSharpening or Replacing the Shredder Blade Model 465A onlyTrouble Shooting Guide OFF-SEASON StorageTrouble Possible Causes Corrective Action Model Number For Models 462B, 463C, 465A Illustrated Parts List TOW Hitch KITModel 462B, 463C, 465A 742-0571 Blade Other Warranties MANUFACTURER’S Limited Warranty for

462 Thru 465 specifications

The Bolens 462 through 465 series represents a significant advancement in the realm of garden tractors, embodying a blend of rugged durability and innovative technology. Designed for both residential and light commercial use, these compact tractors showcase an array of features that enhance their appeal among gardening enthusiasts and landscapers alike.

One of the standout characteristics of the Bolens 462 to 465 models is their robust engine lineup. Equipped with powerful air-cooled, four-stroke engines, these tractors deliver reliable performance whether handling simple lawn care tasks or more demanding garden work. This power is complemented by a smooth hydrostatic transmission, allowing for seamless speed adjustments and ease of operation, making it ideal for navigating tight spaces and varied terrains.

The design of these tractors reflects a commitment to user comfort and ergonomic operation. The adjustable seat offers excellent support, while the intuitive control layout enables operators to easily reach all functions without unnecessary strain. Additionally, features like power steering ensure that maneuvers are smooth and fatigue is minimized during extended use.

When it comes to versatility, the Bolens 462 through 465 excel, with several optional attachments available, including mowing decks, snow throwers, and tillers. This adaptability makes them suitable for year-round use, allowing users to tackle a wide range of tasks from mowing adjacent lawns to snow removal in the winter months.

Another key feature of these tractors is their durable construction. Built with a strong steel frame and quality components, the Bolens series is designed to withstand the rigors of outdoor work. The wider wheelbase provides stability, especially when operating on uneven ground, ensuring a comfortable experience even in challenging conditions.

Technologically, these models integrate user-friendly features such as easy-to-read dashboards that display essential information like fuel levels and engine performance. Maintenance is also simplified through easily accessible components, allowing for quicker service and upkeep.

In summary, the Bolens 462 through 465 series exemplifies the perfect intersection of power, versatility, and user comfort. With a focus on reliability and innovative design, these tractors are more than capable of meeting the demands of today’s gardeners and landscapers while providing an enjoyable user experience.