Black & Decker GH610 instruction manual Replacing, Rewinding Spool from Bulk Line

Page 9

• If lever (q) (figure 12) in

12

q

base of housing becomes

dislodged, replace in correct

 

s

position before inserting new

 

spool into housing.

 

 

• Remove any dirt and grass

 

 

from the spool and housing.

 

 

• Unfasten the end of the

 

 

cutting line and guide the line

 

 

into the eyelet (r) figure13.

 

 

• Take the new spool and

 

 

push it onto the boss (s)

 

 

(figure 12) in the housing.

 

 

Rotate the spool slightlyuntil it

 

 

is seated.

 

 

The line should protrude

13

 

approximately 5-3/8 inches

 

(136mm) from the housing.

 

 

To install bulk line, follow the steps below:

• Unplug tool.

14

• Remove the empty spool

u

from the tool as described

 

in “REPLACING THE

 

SPOOL”.

 

• Remove any remaining

v

cutting line from the spool.

• Make a fold at the end of

 

the cutting line at about 3/4

 

inch (19mm)(u). Feed the

 

cutting line into one of the

 

line anchoring slots (v) as

 

shown in figure 14.

 

• Align the tabs on the spool

 

 

cap withtheslots(t)in the

 

 

housing(figure13).

 

 

• Push the cap onto the

t

r

housing until it snaps

securely into place.

 

 

NOTICE: To avoid tool damage, if the cutting line protrudes

beyond the trimming blade, cut it off so that it just reaches the

blade.

 

 

REWINDING SPOOL FROM BULK LINE

(USEONLY.065IN. ROUNDDIAMETERLINE)(FIGURES14,15,16) Bulk line is also available for purchase from your local retailer. NOTE: Hand wound spools from bulk line are likely to become tangled more frequently than Black & Decker factory wound spools. For best results, factory wound spools are

recommended.9

•Insert the 3/4 inch (19mm) end of the bulk line into the hole (w) in the spool adjacent to the slot as shown in figure 15.

15

x

w

 

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Trimmer / Edger Instructions Table of ContentsMaintain Appliances with Care Follow instructions Safety Warnings Instructions Extension Cords Safety Warnings Instructions Polarized PlugsAssembly Tools Required not Supplied Components Assembly & AdjustmentAttaching the Auxiliary Handle Height AdjustmentConvert to Edging Mode Switching on and OFFOperating Instructions Attaching Extension CordReplacing the Spool Figures 11,12,13 Replacement AccessoriesReplacing SpoolRewinding Spool from Bulk Line Maintenance Troubleshooting Tool Runs SlowlyReplacing the Spool For Service & Sales Service Information Full TWO-YEAR Home USE WarrantySee ʻTools-Electricʼ Black & Decker U.S. IncTAILLE-BORDURE / COUPE- BORDUREMODED’EMPLOI Avertissements DE Sécuritéet Directives Depremièreimportance Page Conserver CES Mesures Avertissements DE Sécurité ET Directives Fiches PolariséesTension ComposantsPose DU PARE-MAIN Assemblage ET RéglageFixation DE LA Poignee AuxiliaireFixation DE LA Rallonge Reglage DE LA HauteurConvertir AU Mode COUPE-BORDURE Mise EN Marche ET ArretFIL Tranchant / Avance DU FIL Accessoires DE Rechange Composer le 1-800-544-6986 ou consulterRemplacer LA Bobine Bobine » Section « Remplacer LALʼOUTIL Fonctionne Lentement Outils électriques Remplacement Gratuit DES EtiquettesPodadora / Bordeadora Manual DE Instrucciones Siempre Utilice Protección Para LOS Ojos utilice Importantes Sobre SeguridadUtilice LA Vestimenta Adecuada no utilice ropa holgada LA Cuerda Giratoria Realiza UNA Función DE CorteNo sumerja la herramienta en agua ni la salpique con una Instrucciones Y Advertencias DE Seguridad Cables ProlongadoresSeguridad Enchufes Polarizados Interruptor ComponentesMango auxiliar Guía de borde Protector CarreteHerramientas QUE SE Requieren Para EL Ensamblaje Ensamblaje Y AjusteQUE no Están Provistas Colocacion DEL Mango AuxiliarInstrucciones DE Operación Ajuste DE AlturaColocacion DEL Cable Prolongador Conversión AL Modo DE Bordeado Encendido Y ApagadoEn la figura Cuerda DE CORTE/ALIMENTACIÓNDE LA CuerdaReemplazo DE Carretes Accesorios DE RepuestoRebobinado DEL Carrete CON Cuerda a Granel MantenimientoUtilice Solo CUERDADEDIAMETROREDONDADE1,7MM Reemplazo DEL CarreteLA Alimentacion Automatica DE LA Cuerda no Funciona Deteccion DE Problemas LA Herramienta Funciona LentamenteGarantia Completa DE DOS Anos Para USO EN EL Hogar Name · Nombre Esta Garantia no Aplica Cuando Años DE GarantiaSolamente Para Propositos DE Mexico

GH610 specifications

The Black & Decker GH610 String Trimmer is a versatile and powerful garden tool designed to tackle a variety of trimming and edging tasks in residential gardens. With its lightweight design and user-friendly features, it is an excellent choice for homeowners looking to maintain their lawns efficiently.

One of the standout features of the GH610 is its 6.5 amp motor, which provides ample power for cutting through even the toughest grass and weeds. This robust motor allows the trimmer to deliver a cutting swath of 14 inches, making it ideal for larger areas without the need for extensive trimming time. The additional power ensures that users can quickly finish their trimming tasks, leaving more time for enjoyment in the garden.

Equipped with a dual-line feed, the GH610 allows for continuous use without interruptions. The trimmer automatically feeds the line as needed, ensuring a consistent cutting experience. The 0.065-inch line diameter is capable of handling heavy growth, making it effective for both basic lawn care and more demanding landscaping tasks.

The GH610's ergonomic design significantly enhances user comfort. The adjustable handle allows users to customize the grip to their needs, reducing fatigue during extended use. Additionally, it features an automatic height adjustment system, ensuring optimal positioning for users of different heights. This consideration for user ergonomics makes the GH610 a favorite among homeowners who require a tool that balances power with comfort.

Another noteworthy characteristic of the Black & Decker GH610 is its easy storage capability. The trimmer features a collapsible design that allows for efficient storage in small spaces. Whether placed in a garage or a shed, the compact design is particularly beneficial for those with limited storage options.

Furthermore, the GH610 incorporates cutting-edge technologies to enhance its operation. The built-in cord retention system prevents accidental disconnections during use, allowing for uninterrupted trimming tasks. This thoughtful design feature ensures that users can focus on their work without the hassle of re-plugging the trimmer.

In conclusion, the Black & Decker GH610 String Trimmer combines power, user comfort, and innovative features to create an ideal tool for lawn maintenance. With its impressive motor, adjustable handle, and automatic line feed, this trimmer stands out as a reliable choice for tackling a variety of gardening tasks efficiently.
Top Page Image Contents