Pet Hair Lifter
Use to pick up pet hair from carpeted surfaces. Just vacuum like you normally would. The vacuum will grab pet hair when you pull back and it will release hair and suction it up when you push forward.
Transporting cleaner
To move your cleaner from room to room, put the handle in the upright position, tilt the cleaner back on its rear wheels and push forward.
The cleaner can also be moved by using the carry handle.
Operation
Power Switch
The power switch is located on the left side of the vacuum. Push the rocker switch “ON” (1) to vacuum, and “OFF” (0) when cleaning is complete..
Handle Positions
caution:
Before using your vacuum, make sure that the dirt con- tainer is in locked position and that all filters (inner circular, outer circular,
Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three cleaning positions.
1. Upright – for storage and above floor clean- ing with tools.
2. Normal Cleaning – press handle release pedal once. Position used for most house- hold floor cleaning tasks.
3. Low Cleaning – with the vacuum in normal cleaning position, press handle release pedal again. Use for reaching under low furniture such as tables, chairs, and/or beds.
Pet Hair Lifter 
12
16 w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |