Billy Goat QB553HC specifications General Safety, Assembly, Packing Checklist, Boxing Checklist

Page 3

9GENERAL SAFETY

For your safety and the safety of others, these directions should be followed:

Do not operate this machine without first reading owner's manual and engine manufacturer's manual.

Use of Ear Protection is recommended while operating this machine.

Use of Eye and breathing protection is recom- mended when using this machine, especially in dry and dusty conditions.

·DO NOT place hands or feet inside air intake opening, near exhaust outlet or near any moving parts.

·DO NOT start engine without deflector attached to exhaust outlet.

·DO NOT direct exhaust outlet toward any bystanders. ·DO NOT operate this equipment without first inspecting

work area.

·DO NOT operate this equipment during excessive vibration. ·DO NOT start engine without housing front plate attached. ·DO NOT operate this machine on slopes greater than 20%. ·DO NOT blow any hot or burning debris, or any toxic or explosive material.

·DO NOT allow children to operate this equipment.

10ASSEMBLY

Read all safety and operating instruc- tions before assembling or starting this unit.

PUT OIL IN ENGINE BEFORE STARTING

Your Billy Goat is shipped from the factory in one carton, completely assembled except for the upper handle, and handle brace.

1. Install upper handle (Item 28), to preassembled lower handle (item 29), using two screws (Item 17), and two lock nuts, (Item 32). Hand tighten only.

2. Install front of handle brace (Item 30), to blower housing using one screw (Item 17), one washer (Item 58) and one lock nut (item 32). Install rear of handle brace (item 30) to upper handle using two screws (item 17), two washers (item 58), and two lock nuts (item 32).

3. Securely tighten all hardware listed above in steps 1 thru 2.

4.Connect spark plug wire.

11PACKING CHECKLIST

These items should be included in your carton. If any of these parts are missing, contact your dealer.

Boxing Checklist

Check

Handle Brace

400951

Parts Bag & Litera- ture Assy

Denotes parts found in Parts Bag Assembly (shown on page 4).

Check

Handle Upper

Assembly

430235

Check

Parts Bag &

Literature Assy

430261

Check

Honda 5.0HP OHC

English P/N 31ZL8600

Part No. 430262

Page 3 of 8

Form No. F020399B

Image 3
Contents Caster KIT For ModelHonda OHC Sound Interest of SafetyBoxing Checklist General SafetyAssembly Packing ChecklistChoke Lever Parts BAG & Literature Assy P/N ControlsInstruction Labels Engine Labels Throttle ControlBlowing Operation OperationStarting Handling & TransportingParts Drawing Washer Vibration Door Diverter Assemblyincludes ITMLabel do not Fill When Engine is HOT Engine 5.0 HP OHC Honda GC160Disconnect Spark Plug Wire Before Servicing Unit Reconnect Spark Plug Wire Guards Before Starting EngineTroubleshooting

QB553HC specifications

The Billy Goat QB553HC is an innovative, high-performance walk-behind leaf blower designed to meet the demands of landscaping professionals and homeowners alike. This powerful machine is equipped with a robust Honda engine that delivers exceptional performance and reliability, ensuring that users can tackle even the toughest jobs with ease.

One of the standout features of the QB553HC is its impressive air velocity. With a maximum airspeed of 190 mph, this blower is capable of moving leaves, debris, and grass clippings swiftly and efficiently. The blower's unique nozzle design focuses air output into a concentrated stream, further enhancing its ability to clear large areas quickly. This makes it an ideal choice for both residential and commercial applications, where time and efficiency are paramount.

The QB553HC also boasts a user-friendly design that enhances its usability. Its lightweight construction and ergonomic handles reduce operator fatigue, allowing for extended periods of use without discomfort. The blower is equipped with a variable throttle control that gives users the ability to adjust the airspeed to suit various tasks, making it versatile enough for different landscaping needs.

In terms of technology, the Billy Goat QB553HC is designed with a heavy-duty housing that ensures durability and longevity. This robust construction protects the internal components from wear and tear, allowing the machine to withstand the rigors of daily use in demanding environments. The blower’s engine is also equipped with an innovative recoil starter, making it easy to start and operate with minimal effort.

Another notable characteristic of the QB553HC is its ability to handle various types of debris effectively. Whether it's dry leaves, wet leaves, or light debris, the blower's performance remains consistent. Additionally, the machine features a simple maintenance system, making it easy for users to keep it in optimal working condition.

For those looking for a reliable and efficient leaf blower, the Billy Goat QB553HC is an excellent choice. Its combination of powerful performance, user-friendly design, and durable construction makes it a valuable tool for anyone looking to maintain their outdoor spaces efficiently. With the QB553HC, users can achieve a clean and well-kept landscape with ease, ensuring that their outdoor areas remain attractive and inviting throughout the year.