Billy Goat QB553HC Starting, Handling & Transporting, Blowing Operation, Storage

Page 5

16OPERATION

INTENDED USE: This machine is designed for cleaning outdoor surfaces, where the debris can be effectively blown into a consolidated area for convenient pickup and removal.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects.

Note: See parts list for proper impeller and engine mounting bolt torque specifications.

(See trouble shooting section on page 8).

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operat- ing. Make sure that all operators of this equipment are trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING

16.1STARTING

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used.

Engine must be level when checking and filling oil and gasoline.

ENGINE SPEED: The throttle control is located on the face of the engine. Under normal conditions, operate at minimum throttle to accomplish your current cleaning task.

STOP SWITCH: There is not a stop switch on the QB553HC models. The engine can be stopped by moving the throttle to the SLOW position.

CHOKE: Operated with choke lever on the face of the engine.

THROTTLE: Move throttle control to fast position. Pull starting rope to start engine.

Front Discharge

Side Discharge

16.4HANDLING & TRANSPORTING:

Using two people to lift machine is recommended. Lift holding the handle and handle brace. Secure in place during transport.

IF YOUR UNIT FAILS TO START:

See Troubleshooting on page 8.

16.2BLOWING OPERATION

Adjust diverter rod to side discharge for normal blowing or to forward discharge for blowing along walls, fences or hard-to- reach areas (see right).

16.5STORAGE

Never store engine indoors or in enclosed poorly venti- lated areas with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Be sure engine is cool. Do not smoke. Run engine until fuel tank is empty and engine runs out of gasoline.

NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on stabilizer container. Run engine at least 10 min. after adding stabilizer to allow it to reach the carburetor.

Part No. 430262

Page 5 of 8

Form No. F020399B

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Honda OHC Caster KITFor Model Sound Interest of SafetyAssembly General SafetyPacking Checklist Boxing ChecklistInstruction Labels Engine Labels Parts BAG & Literature Assy P/N ControlsThrottle Control Choke LeverStarting OperationHandling & Transporting Blowing OperationParts Drawing Label do not Fill When Engine is HOT Door Diverter Assemblyincludes ITMEngine 5.0 HP OHC Honda GC160 Washer VibrationTroubleshooting Disconnect Spark Plug Wire Before Servicing UnitReconnect Spark Plug Wire Guards Before Starting Engine

QB553HC specifications

The Billy Goat QB553HC is an innovative, high-performance walk-behind leaf blower designed to meet the demands of landscaping professionals and homeowners alike. This powerful machine is equipped with a robust Honda engine that delivers exceptional performance and reliability, ensuring that users can tackle even the toughest jobs with ease.

One of the standout features of the QB553HC is its impressive air velocity. With a maximum airspeed of 190 mph, this blower is capable of moving leaves, debris, and grass clippings swiftly and efficiently. The blower's unique nozzle design focuses air output into a concentrated stream, further enhancing its ability to clear large areas quickly. This makes it an ideal choice for both residential and commercial applications, where time and efficiency are paramount.

The QB553HC also boasts a user-friendly design that enhances its usability. Its lightweight construction and ergonomic handles reduce operator fatigue, allowing for extended periods of use without discomfort. The blower is equipped with a variable throttle control that gives users the ability to adjust the airspeed to suit various tasks, making it versatile enough for different landscaping needs.

In terms of technology, the Billy Goat QB553HC is designed with a heavy-duty housing that ensures durability and longevity. This robust construction protects the internal components from wear and tear, allowing the machine to withstand the rigors of daily use in demanding environments. The blower’s engine is also equipped with an innovative recoil starter, making it easy to start and operate with minimal effort.

Another notable characteristic of the QB553HC is its ability to handle various types of debris effectively. Whether it's dry leaves, wet leaves, or light debris, the blower's performance remains consistent. Additionally, the machine features a simple maintenance system, making it easy for users to keep it in optimal working condition.

For those looking for a reliable and efficient leaf blower, the Billy Goat QB553HC is an excellent choice. Its combination of powerful performance, user-friendly design, and durable construction makes it a valuable tool for anyone looking to maintain their outdoor spaces efficiently. With the QB553HC, users can achieve a clean and well-kept landscape with ease, ensuring that their outdoor areas remain attractive and inviting throughout the year.
Top Page Image Contents