Billy Goat AE401HST, AE401S owner manual General Safety Instructions and Symbols

Page 4

AE Owner’s Manual

GENERAL SAFETY INSTRUCTIONS and SYMBOLS

The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment.

This symbol indicates important information that will prevent injury to yourself or others.

This symbol indicates ear protection is recommended when operating this equipment.

This symbol indicates eye protection is recommended when operating this equipment.

This symbol indicates gloves should be worn when servicing this equipment.

This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment.

This symbol indicates important information that will prevent damage to your BILLY GOAT ® Aerator.

This symbol indicates the engine oil level should be checked before operating this equipment.

Read and make sure you thoroughly understand the following safety precautions before assembling, operating or servicing this equipment:

READ this manual and the engine manufacturer’s manual carefully before assembling, operating, or servicing this equipment.

EAR PROTECTION is recommended when operating this equipment.

EYE PROTECTION is recommended when operating this equipment.

BREATHING PROTECTION is recommended when operating this equipment.

EXHAUST from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land unless a spark arrester is installed on the muffler as required by Section 4442 of the California Public Resources Code. The arrester must be maintained in good working order. Other states may have similar laws. Federal laws apply on federal lands.

DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly fatal poison.

Part No 360314

4

Form No F031708A

Image 4
Contents Tine ROW KIT Tine KITContents About this ManualSpecifications Serial Plate DataGeneral Safety Instructions and Symbols Page Intended USE Instruction LabelsEngine Labels Throttle ControlsAssembly Packing ChecklistPUT OIL in Engine Before Starting Operation Handling & TransportingParking Unit StorageTines RAISING/LOWERING Aerating OperationAerating Tips Folding HandleMaintenance Periodic MaintenanceTine Reel Removal and Tine ROW Replacement Tine ROW ReplacementBelt and Chain Tension Adjustment Adjusting Belt Tension Individual Tines ReplacementAdjusting Chain Tension Drive Belt Replacement Chain ReplacementLubrication Bearings ChainsTroubleshooting Warranty Claim ProcedureMaintenance Record Parts Drawing AE Parts List AE Parts Drawing AE Frame Assembly WA AE401 Form No F031708A