Billy Goat AE401HST, AE401S Intended USE, Instruction Labels, Engine Labels, Throttle Controls

Page 6

AE Owner’s Manual

INTENDED USE

INTENDED USE: This machine is designed for aerating established lawns and large grass covered areas. The machine should not be used for any other purpose than that stated above.

DO NOT operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn tine reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See trouble shooting section on page 14).

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ® Aerator. If any labels are damaged or missing, replace them before operating this equipment. Part numbers from the Illustrated Parts List are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the part numbers shown.

LABEL WARNING GUARDS

LABEL EXPLOSIVE FUEL

LABEL PATENT

LABEL WARNING UNIT WEIGHT

P/N 900327

P/N 400268

P/N 360286

P/N 360188

LABEL LIFT HERE

LABEL INSTRUCTIONS AE

P/N 360187

P/N 360025

ENGINE LABELS

SUBARUHONDA

THROTTLE CONTROLS

SubaruHonda

Throttle

Throttle

Fuel valve Choke

Choke

Fuel valve

Part No 360314

6

Form No F031708A

Image 6
Contents Tine ROW KIT Tine KITContents About this ManualSpecifications Serial Plate DataGeneral Safety Instructions and Symbols Page Engine Labels Intended USEInstruction Labels Throttle ControlsPacking Checklist AssemblyPUT OIL in Engine Before Starting Operation Handling & TransportingTines RAISING/LOWERING ParkingUnit Storage Aerating OperationAerating Tips Folding HandleTine Reel Removal and Tine ROW Replacement MaintenancePeriodic Maintenance Tine ROW ReplacementIndividual Tines Replacement Belt and Chain Tension Adjustment Adjusting Belt TensionAdjusting Chain Tension Lubrication Bearings Drive Belt ReplacementChain Replacement ChainsTroubleshooting Warranty Claim ProcedureMaintenance Record Parts Drawing AE Parts List AE Parts Drawing AE Frame Assembly WA AE401 Form No F031708A