Billy Goat SC120H specifications Cbelt Replacement and Adjustment

Page 20

C)BELT REPLACEMENT AND ADJUSTMENT

Switch off the engine and disconnect the spark plug wire before carrying out any maintenance or repair work on the machine.

If a belt is worn or breaks it should be replaced as follows:

-remove the metal guard ( fig. 6 ref. A), by unscrewing and taking out the screws shown in figure 6 ref. B and C.

C1)BLADE BELT

Disconnect the connecting rod (Fig. 7 Ref. B) by removing the nut and loosening the screw that secure it to the arm (Fig. 7 Ref. C)

-Once the connecting rod has been disconnected the belt can be slipped off (Fig. 7 Ref. A) by manually turning the relative lower pulley anticlockwise (Fig. 7 Ref. D).

-To fit the new belt follow the procedure in the reverse order.

-Afterwards check that the belt is correctly positioned by using the relative blade control lever. When this lever is lowered and the belt is at maximum tension, the distance between the belt and the relative belt guides (Fig. 7 Ref. E) should be approximately 2 mm.

-Then make sure that the belt works properly by tugging lightly on the self- winding starter cable with the engine switched off and the spark plug wire disconnected. If everything is working properly the pulley will turn on the engine but will not engage the belt.

If the belt engages push the engine back slightly towards the rear of the machine (in the direction of the handlebars) until the belt is in the correct

position.

C2)FORWARD CONTROL BELT

Remove the blade control belt following the instructions given in the preceding paragraph.

-Remove the blade (Fig.1 Ref. G) following the instructions provided in the section entitled “Blade removal and replacement”.

-Then remove the forward control belt from the lower pulley by turning the belt anticlockwise (Fig. 8 Ref. A e B)

-To fit the new belt follow the procedure in the reverse order.

-Afterwards check that the belt is positioned and working correctly using the relative forward control lever. When this lever is lowered and the belt is at maximum tension, the distance between the belt and the relative belt guides (Fig. 8 Ref. C) should be approximately 2 mm.

-Then make sure that the belt works properly by tugging lightly on the self- winding starter cable with the engine switched off and the spark plug wire disconnected. If everything is working properly the pulley will turn on the engine but will not engage the belt.

If the belt engages push the engine back slightly towards the rear of the machine (in the direction of the handlebars) until the belt is in the correct position.

370310

F112003A

 

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operating and Safety Instructions Operating and Safety Instructions USE of the ManualContents of the SOD Cutter Manual Engine Exhaust from this product contains chemicals known Technical Data for the SOD Cutter SC120H HEIGHT-ADJUSTABLE Handlebars Tires Lifting and Transportation370310 F112003A Main Parts of the Machine Control and Adjustments Blade Clutch Control LeverCutting Height Adjustment Lever 370310 F112003A Safety Information PreparationWorking USE After USE Transportation of the Machine Description of the Safety and Guard Systems Operations to be Carried OUT Before Switching onStarting and Driving the SOD Cutter ClosedCutting Tips Checks B1BLADE Control CableCbelt Replacement and Adjustment 370310 F112003A 370310 F112003A To remove the blade proceed as follows Maintenance and Storage Checking and Replacing the Transmission OIL Cleaning the Machine Seasonal LONG-TERM Storage PeriodsTechnical Assistance WarrantyDecommissioning and Scrapping Troubleshooting Fault Cause ActionEngine Fault Cause Measures to be Taken 370310 F112003A 370310 F112003A Parts List 1/6 Parts List 1/6 Page Parts List 2/6 Page Parts List 3/6 Page Parts List 4/6 Page Parts List 5/6 Parts List 5/6 Page Parts List 6/6 Parts List 6/6 370310 F112003A

SC120H specifications

The Billy Goat SC120H is a robust and highly efficient self-propelled debris loader designed for both commercial and residential applications. Known for its exceptional performance, this machine is engineered to tackle a variety of challenging outdoor tasks, making it an indispensable tool for landscape professionals, municipalities, and property owners alike.

One of the standout features of the SC120H is its powerful Honda GX390 engine, which delivers an impressive 11.4 horsepower. This high-performance engine ensures that users can handle tough debris with ease, whether it's leaves, grass clippings, or other yard waste. The engine's design emphasizes reliability and longevity, making it suitable for extended hours of work without compromising on power.

The SC120H boasts a large capacity 15-inch x 12-inch intake, which accommodates larger debris efficiently. With an impressive suction capability, the loader can gather and transport a significant amount of waste in a single pass. This feature is particularly valuable for commercial operators who require speed and effectiveness while managing extensive outdoor projects.

Incorporating state-of-the-art technology, the SC120H features a durable steel frame that enhances stability and minimizes wear during operation. Its self-propelled design provides excellent maneuverability, allowing users to navigate tight spaces and challenging terrain with ease. The loader is equipped with adjustable speed controls, enabling operators to adapt to various job types and conditions by optimizing the machine’s performance accordingly.

Another notable characteristic of the SC120H is its user-friendly design. The control panel is intuitively laid out, ensuring that even those who are new to debris loaders can operate it efficiently. The comfortable grips and adjustable settings make it easy to use for prolonged periods without causing operator fatigue.

Maintenance is simplified with the SC120H, thanks to its accessible design for oil changes, filter replacements, and other routine tasks. This convenience means less downtime and ensures that the loader remains in peak operating condition throughout its lifespan.

In summary, the Billy Goat SC120H is a versatile and powerful debris loader engineered for efficiency and durability. With its robust Honda engine, large intake capacity, and user-friendly features, it is an excellent choice for any professional or homeowner seeking to maintain a pristine outdoor environment. This machine combines practicality with advanced technology, making it a valuable addition to any landscaping or clean-up operation.
Top Page Image Contents