Billy Goat SC120H specifications Engine Fault Cause Measures to be Taken

ENGINE

FAULT	CAUSE				MEASURES TO BE TAKEN
Engine sluggish at switch on	1.	Accelerator not in start-up			1.	Move the accelerator to the
		position				intermediate position
	2.	Choke not closed			2.	Close the choke when cold.
					3.	Check the fuel tank and
	3.	Petrol does not arrive				remove any water or sedi-
						ment.
	4.	Air bubbles or water inside			4.	Make sure that the feed
		the petrol lines				cock is open.
	5.	Thick oil prevents rotation			5.	Check the lines and bands.
						Repair or replace if dam-
	6.	Winding or start mecha-				aged
		nism faulty			6.	Use oil with a viscosity
						suited to the temperature
	7.	Spark plug in poor condi-			7.	Replace		winding or	start
		tion				mechanism
					8.	Clean	or replace		spark
						plug.	Adjust the distance
						between the electrodes.
Poor power	1.	No fuel			1.	Refill tank with petrol
	2.	Air filter blocked			2.	Clean air filter
	3.	Elastic bands worn			3.	Replace elastic bands
Engine stalls	1.	No fuel			1.refill tank with petrol
	2.	Feed cock shut off			2.open feed cock
Exhaust fumes dark	1.	Low grade fuel			1.	Replace		with high	grade
	2. Too much engine oil					fuel
					2. Restore			engine oil to cor-
						rect level
Engine emits black smoke and	1.	Air filter blocked			1.	Clean air filter
power is poor	2.	Choke not fully opened			2.	Open the choke completely
Exhaust fumes bluish	1.	Too much engine oil			1.	Restore engine oil to cor-
	2.	Elastic bands worn				rect level
					2.	Replace elastic bands
Silencer becomes red through	1.	Air filter blocked			1.	Clean air filter
overheating	2.	Inside	of	self-winding	2.	Clean self-winding starter
		starter	blocked	with grass		housing
		cuttings

For any problems not easily resolved or in case of doubt you are advised to contact your dealer.

370310	F112003A
	29