Operation, Starting Stop Position | Billy Goat HW651HSP guide

HW Owner’s Manual

OPERATION

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn blade, loose blade jam nut, loose engine or lodged foreign objects. Note: See maintenance section for proper blade jam nut torque specifications.

STARTING

STOP POSITION

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline.

ENGINE SPEED: Set at factory. The engine runs at a constant speed.

1.Select desired cutting height before starting engine.

2.Place mower on a sidewalk or driveway where the mower blade is in an unloaded condition. If it must be started on the lawn, move mower over previously cut grass.

3.Be sure drive lever (Yellow lever on the right hand side) is not engaged (fig. 1).

4.Prime to choke. Prime is located in front of the engine.

5.Pull down on operator presence control lever (Red lever on the left hand side - fig. 1.1), then pull back on starter rope slowly until resistance is felt. Then pull cord rapidly to start. Repeat if necessary.

HANDLING & TRANSPORTING:

Fig. 1

OPERATING POSITION

Fig. 1.1

Using two people to lift machine is recommended. Lift holding the handle and front of deck. Secure in place during transport.

Never lift the machine while the engine is running.

CUTTING OPERATION

CAUTION: The mower blade will be rotating whenever engine is running.

CAUTION: Shut down the engine when crossing gravel drives, walks or roads and under all conditions where thrown objects might be a hazard.

CLEARING A CLOGGED CUTTING DECK: Turn engine off and wait for blade to stop completely. Disconnect spark plug wire.

Wearing durable gloves, remove clog. Danger, the clog may contain sharp materials. Reconnect spark plug wire.

CAUTION: Use extreme care when operating the blade. Inspect the work area for foreign objects that could cause damage to the unit or injure the operator if struck by the blade. Never operate the blade with bystanders in the work area

CUTTING HEIGHT ADJUSTMENT

Fig. 2

CAUTION: DO NOT make cutting height adjustment when engine is running. Cutting height can be adjusted from 2" to 4" by 1/2" increments by lowering or raising the deck. For easiest adjustment change the height from one side at a time. To change cutting height, remove lock pins, raise or lower deck to desired height, and then reinsert lock pins. Repeat this step on other side NOTE: Be sure that the deck is level. Running the deck out of level will result in poor cut quality and increased belt wear.

Part No 510267

Form No F052808A

HW651HSP specifications

The Billy Goat HW651HSP is an exceptional piece of lawn maintenance equipment designed to cater to both residential and commercial needs. Combining power and efficiency, this hydrostatic walk-behind mower is an optimal choice for those looking to maintain their lawns and landscapes with precision.

One of the standout features of the HW651HSP is its powerful Honda GXV engine. This reliable engine delivers ample power for tackling even the toughest grass and hilly terrains. The engine's design ensures smooth operation and durability, making it an ideal choice for extended use in various conditions.

Another key characteristic of the HW651HSP is its hydrostatic drive system. This technology provides seamless speed control without the need for belts or pulleys, allowing for easy maneuverability and precise adjustments on the go. Operators can effortlessly change speeds, making it easier to navigate tight spaces or work on intricate landscaping tasks.

The cutting deck of the HW651HSP is 26 inches wide, perfectly suited for both large lawns and smaller garden spaces. This size strikes an excellent balance between efficiency and agility, enabling users to cover ground quickly while still maintaining control. The mower is equipped with a 4-in-1 cutting system, allowing for mulching, bagging, side discharge, or rear discharge, providing versatility for different lawn conditions and user preferences.

Billy Goat has also prioritized operator comfort and safety with the HW651HSP. The unit features an ergonomic handle design that reduces fatigue during prolonged use. The controls are intuitively placed, making it easy for operators to access essential functions without compromising their grip.

Additionally, the HW651HSP is designed for easy maintenance. User-friendly access to major components simplifies routine servicing, ensuring the mower remains in peak condition. Durable construction and high-quality materials contribute to the longevity of the mower, making it a smart investment for those serious about lawn care.

In conclusion, the Billy Goat HW651HSP is a robust and versatile lawn mower equipped with a powerful Honda engine, innovative hydrostatic drive, and a multipurpose cutting system, all designed with operator comfort and ease of maintenance in mind. Whether you're a homeowner or a professional landscaper, this mower aims to deliver superior performance and reliability, setting a benchmark in the walk-behind mower category.