Billy Goat CR550HCV Packing Checklist, PUT OIL in Engine Before Starting, Honda GC 5.0 OHC

Page 3

9GENERAL SAFETY

For your safety and the safety of others, these directions should be followed:

Do not operate this machine without first reading owner's manual and engine manufacturer's manual.

Use of Ear Protection is recommended while operating this machine.

Use of Eye and Breathing protection is recommended when using this machine, especially in dry and dusty conditions.

Wearing gloves is recommended while operating this machine.

·DO NOT place hands or feet underneath unit, near debris outlet or near any moving parts.

·DO NOT start engine without height adjust lever in up position and clutch bail disengaged.

·DO NOT start or operate machine with guards removed. ·DO NOT perform any service on the unit without removing the spark plug wire.

·DO NOT operate a machine that exhibits excessive vibration. ·DO NOT operate this machine on slopes greater than19°. ·DO NOT use this unit on any surface other than grass lawns. ·DO NOT allow children to operate this equipment.

-DO read all maintenance and operating instructions before begining work.

-DO read all engine manufacturers operating and maintenance instructions.

-DO inspect lawn before begining work. Remove all rocks, wire, string, or other objects that can present a hazard during work prior to starting.

-DO identify and mark all fixed objects to be avoided during work, such as sprinkler heads, water valves, buried cables, or clothes line anchors, etc.

10ASSEMBLY

Read all safety and operating instructions before assembling or starting this unit.

PUT OIL IN ENGINE BEFORE STARTING

1.ASSEMBLE left rear wheel to axle using 3/4" wrench.

2.UNFOLD the upper handle (item 26) and slide handle lock loops (item 28) into place to secure the upper handle to the lower.

3.CHECK engine oil level and fill to proper level with engine manufactur ers recommended grade of oil. Move height adjust lever to down position, to level engine during checking. See engine manufacturers instruction manual.

4.CONNECT spark plug wire.

11PACKING CHECKLIST

These items should be included in your carton. If any

Per Model

of these parts are missing, contact your dealer.

 

26

28

Engine

 

 

Check

 

 

 

Honda GC 5.0 OHC

Manual Per

 

 

 

 

Model

 

 

 

 

 

 

 

 

28

Check

Check

Literature

Assembly

350243

Check

Check

Owner's

Manual

350245

Literature CR

Accessories

350246

Warranty

Card 400972

EU Declaration

of Conformity &

EU Distributor

List 350139

Part No. 350245

Page 3 of 12

Form No. F021805A

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Spacer Bumpers Flail BladesFlail Shafts Drive BeltTable of Contents 7SOUNDVibration Owners Manual Packing ChecklistPUT OIL in Engine Before Starting Honda GC 5.0 OHCControls Instruction LabelsEngine Labels Blade Position & Depth Control Lever Adjusting Blade DepthStarting Engine Raking OperationFolding Handle VERTI-CUTTING OperationOverseeding Operation RAKING/SLICING TipsSlicing Blade Wear Disconnect Spark Plug Wire Before Servicing UnitDrive Belt Replacement Blade Wear and Rotating Reel END to END Flail Blade WearCR550HC, CR550HCV Parts DrawingParts CR550HC QTY CR550HCV List Flail Shaft KIT Flail Blade KIT Flail Reel AssySpacer Bumper KIT Slicing Blade KIT Slicing Reel Assy350147 Screwcap 1/4-20 x 3/4, GR 350151 NUT Lock 1/4-20 Unit Storage General Engine SpecificationsTroubleshooting Engine

CR550HCV specifications

The Billy Goat CR550HCV is a robust and efficient commercial-grade leaf blower that has become a favorite among landscaping professionals and homeowners alike. Renowned for its powerful performance and ease of use, this machine is designed to tackle a variety of outdoor cleaning tasks, making it an essential tool for maintaining lawns, gardens, and outdoor spaces.

One of the main features of the CR550HCV is its impressive 196cc Honda engine, which provides a strong and reliable power source. This engine generates air speeds of up to 200 miles per hour, enabling users to clear leaves, debris, and even light snow with ease. The blower is equipped with a 4-stroke engine that is designed for optimal fuel efficiency and reduced emissions, making it an environmentally friendly choice for outdoor maintenance.

The CR550HCV boasts a lightweight design that enhances maneuverability, allowing users to navigate tight spaces and ensure thorough cleaning in hard-to-reach areas. Weighing only 65 pounds, it is well-balanced and easy to handle, which is particularly beneficial during extended periods of use. The ergonomic handle is designed for comfort, featuring vibration-dampening technology that reduces operator fatigue.

One of the standout technologies in the CR550HCV is the "StartSimple" starting system. This feature simplifies the starting process, allowing users to get to work quickly without the hassle of complicated starting procedures. The blower also includes a high-performance air filtration system, ensuring that the engine runs smoothly and prolonging its lifespan by keeping dirt and debris out.

The CR550HCV is designed for versatility, making it suitable for both residential and commercial applications. Its variable-speed throttle control enables users to adjust the airflow to suit different tasks, from gentle blowing for flowerbeds to high-powered clearing for driveways and large lawns. The machine also features a durable impeller that enhances its performance, producing a wide air volume for efficient debris removal.

Additionally, the CR550HCV is built with a sturdy frame and durable components, ensuring longevity and resilience in demanding environments. It also includes a protective cover for the engine, safeguarding it from the elements and ensuring reliable performance throughout the seasons.

In summary, the Billy Goat CR550HCV leaf blower combines power, efficiency, and user-friendly features, making it an excellent investment for anyone looking to maintain their outdoor space. With its Honda engine, lightweight construction, and advanced technologies, this machine delivers exceptional performance, setting a new standard in the world of outdoor power equipment.
Top Page Image Contents