Billy Goat HW650SP owner manual Drive Belt, Self Propelled Drive Adjustment

Page 9

17

MAINTENANCE continued

17.2BELT REPLACEMENT continued

Drive Belt

Tools required: 3/8 inch socket, 1/2 inch socket, 3/8" torque wrench.

1.Follow steps 1 through 5 above to remove the blade drive belt.

2.Set the unit on its side to allow access to both pulley and the blade.

Note: When tipping the unit on its side, keep the air cleaner side of engine up. Be sure the gas is drained out to prevent from spilling before tipping the unit on its side. Never tip the mower more than 90 degrees and do not leave the mower tipped for any length of time.

3.Swing over the drive belt idler to release tension on drive belt then remove it (fig. 9).

4.Install the new belt (fig. 10).

Note: Use only O.E.M. approved belt for this machine - B.G.I. Part no. 510138.

5.Set the unit back down.

6.Follow steps 6 through 8 on previous section to reinstall the blade belt.

Fig. 9

Fig. 10

17.3SELF PROPELLED DRIVE ADJUSTMENT

Tools required: two 1/2 wrenches.

As the clutch wears, adjustments may be required to maintain proper control cable tension, and clutch engagement (fig. 11). If the clutch begins slipping or squealing during normal operation it may require an adjustment to increase the clutch cable tension. A properly adjusted drive clutch should require a minimum of 3/8" of spring stretch when drive bail is engaged.(fig. 12) Adjust by tightening or by loosening clutch cable adjusting nut as required, located at the underneath the engine base (fig. 13). Replacement of cable may be necessary if adjustment will not allow for proper drive clutch.

WARNING: If the drive clutch begins to squeal or slip, do not continue to operate your unit until adequate adjustment or repair has been performed. Improper adjust- ment can cause drive clutch to slip and overheat, greatly

reducing machine performance and transmission life.

Fig. 11

Fig. 12

3/8" stretch when engaged

Fig. 13

Part No. 510153

Page 9 of 12

Form No. F102802D

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Accessories Specifications 8VIBRATION 7SOUNDGeneral Safety Controls AssemblyCutting Height Adjustment StartingCutting Operation Front Caster Lock PropulsionHillside Mowing Handling & TransportingStorage Belt Replacement MaintenanceDrive Belt Self Propelled Drive AdjustmentParts Drawing ROD Bail Drive WA Problem Possible Cause Solution Troubleshooting

HW650SP specifications

The Billy Goat HW650SP is a robust and powerful hydrostatic wheeled lawn vacuum designed for heavy-duty yard clean-up tasks. Perfect for both professional landscapers and homeowners with large properties, it excels in managing leaves, debris, and even acorns with efficiency and ease.

One of the standout features of the HW650SP is its powerful 6.5 horsepower Honda engine. This reliable engine delivers a strong and consistent performance, allowing users to tackle even the most challenging clean-up jobs. The hydrostatic drive system offers smooth and infinite speed control, enabling operators to navigate terrain easily, whether it’s a flat lawn or more uneven ground.

The vacuum is equipped with a large, 22-inch wide suction nozzle, which allows for maximum debris pickup in fewer passes. This feature is particularly advantageous during fall when leaves tend to accumulate quickly. The adjustable height feature of the suction nozzle allows users to customize the vacuum's performance based on the current terrain, ensuring efficient operation across various surfaces.

Built for durability, the HW650SP incorporates a heavy-duty steel frame and a rugged polyethylene housing that can withstand the rigors of regular use. Its 10-inch wheels provide excellent traction and stability, making it easier to maneuver across varied landscapes. Additionally, the vacuum features a generous 40-gallon debris bag, which can be emptied without tools, making the cleanup process straightforward and hassle-free.

Another remarkable technology in the HW650SP is its self-propelled mechanism, which alleviates the physical strain on users during extended clean-up sessions. This feature allows operators to maintain a comfortable pace without having to exert excessive effort.

The design of the Billy Goat HW650SP is user-friendly, with controls that are easy to access and operate. This ease of use makes it suitable for a wide range of users, from professionals to homeowners looking to maintain a pristine yard.

In conclusion, the Billy Goat HW650SP is a versatile and efficient lawn vacuum that combines power, durability, and ease of use, making it an essential tool for anyone looking to keep their outdoor spaces clean and tidy. With its impressive features and technologies, it stands out in the market for lawn care equipment.
Top Page Image Contents