CR Owner’s Manual
SOUND
SOUND LEVEL 81 dB(a) at Operator Position
Sound tests were conducted in accordance with 2000/14/EEC, and were performed on
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.
General Conditions: | Sunny |
Temperature: | 43oF (6.1oC) |
Wind Speed: | 10 mph (16.1 kmh) |
Wind Direction: | North West |
Humidity: | 82.2% |
Barometric Pressure: | 29.72Hg (754 mm Hg) |
VIBRATION DATA
VIBRATION LEVEL 1.01g (9.94m/s2)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on
General Conditions: | Sunny |
Temperature: | 72.32oF (22.4oC) |
Wind Speed: | 3.8 mph (6.12kph) |
Wind Direction: | East |
Humidity: | 62.2% |
Barometric Pressure: | 29.9Hg (101.3kpa) |
INTENDED USE
INTENDED USE: This machine is designed for removing thatch from your lawn, renovation of existing lawns, and to assist in overseeding operations. The machine should not be used for any other purpose than that stated above.
Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See trouble shooting section on page 12).
Part No 350245 | 6 | Form No F062206A |
|