Billy Goat CR550HC owner manual Packing Checklist, Assembly, PUT OIL in Engine Before Starting

Page 8

CR Owner’s Manual

PACKING CHECKLIST

Your Billy Goat Power Rake is shipped from the factory in one carton, completely assembled.

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box the Handle Assembly is attached and folded over

PUT OIL IN ENGINE BEFORE STARTING

PARTS BAG &

LITERATURE ASSY

Warranty card P/N- 400972, Owner’s Manual P/N-350245, Declaration of Conformity P/N-350139, and Literature CR Accessories 350246.

26

2 8

Boxing Parts

Checklist

Honda GC 5.0 OHC

Literature Assy

P/N-350243

2 8

ASSEMBLY

1.ASSEMBLE the left rear wheel to the axle using ¾” wrench.

2.UNFOLD the upper handle (item 26) and slide handle lock loops (item 28) into place to secure the upper handle to the lower.

3.CHECK engine oil level and fill to proper level with engine manufacturers recommended grade of oil. Move height adjust lever to down position, to level engine during checking. See engine manufacturers instruction manual.

4.CONNECT spark plug wire.

Part No 350245

8

Form No F062206A

 

Image 8
Contents Billy Goat CR550HC Power Rake Contents About this ManualSpecifications Serial Plate DataGeneral Safety Instructions and Symbols Form No F062206A Intended USE SoundVibration Data Instruction Labels Engine LABELS/CONTROLSPUT OIL in Engine Before Starting Packing ChecklistAssembly Adjusting Blade Depth OperationFolding Handle Handling & TransportingRAKING/SLICING Tips Raking OperationVERTI-CUTTING Operation Maintenance Periodic MaintenanceFlail Blade Wear Slicing Blade WearWarranty Claim Procedure StorageParts Drawing CR550HC Parts List S TFlail Blade KIT Flail Reel AssyFlail Shaft KIT Spacer Bumper KIT Slicing Reel Assy Slicing Blade KIT