TOW AE Owner’s Manual
PACKING CHECKLIST
Your Billy Goat is shipped from the factory in one carton.
READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box.
PARTS BAG &
LITERATURE ASSY
Warranty card P/N- 400972, Owner’s Manual
To secure, place rod into groove with the pin resting between the frame
Boxing Parts
Checklist
Lift Bar Tow AE - 361152
Tow AE Frame -
Wheel Assembly Left -
Wheel Assembly Right -
Hitch Assembly- 361114
Loose Parts Assembly - 361148
Owner’s Manual Tow AE 361149
ASSEMBLY
1. Assemble the machine. See page 11 for parts illustration. Assembly hardware will be located in the parts bag.
2. First attach the two frames together (item 1) with the hardware (items 31,32, and 35).
3. Grease the shafts on the wheel assemblies. Then attach the wheel assemblies to the frame by sliding them in the collars on the front side of the frame. Then secure them in place with the snap rings (item 22).
4. Attach the hitch assembly and braces (items 9 and 10) to the frame with the hardware (items 31, 32, 33, 34, 35, and 36).
5. Attach the machine to a suitable hitch using the pin (item 15) and hitch pin (item 16).
6. Place water tanks or weights in the designated positions the unit and secure them with a strap. DO NOT overload this machine with weights.
7. Secure the lift rod before aerating.
Part No 361277 | 4 | Form No F061311D |