ProForm PFTL57105.0 user manual Assembly, Make sure that the power cord is unplugged

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches		and your own phillips screwdriver
and adjustable wrench	.

Use the drawings below to identify the assembly hardware. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled.

Screw (108)–10	Latch Screw (46)–2	Console Bolt (76)–4
Silver Ground	Nut (20)–2	Upright Bolt (80)–4
Screw (23)–1
Console Star	Upright Star	Wheel Bolt (90)–2
Washer (77)–4	Washer (4)–4

1.Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (59) so the treadmill will be more stable. Do not fully fold the treadmill until it is completely assem- bled.

Attach a Wheel (94) to the Upright Base (97) with a Wheel Bolt (90) and a Nut (20). Do not overtighten the

Nut; the Wheel must turn freely.

1	59	90
		97
	94
		20

6