Billy Goat F1801V owner manual Troubleshooting, Warranty Claim Procedure

Page 13

FORCE BLOWER 18 Owner’s Manual

TROUBLESHOOTING

Problem

Possible Cause

Solution

Abnormal vibration.

· Loose or out of balance impeller.

· Check impeller and replace if required.

 

· Loose engine.

· Check engine.

 

 

 

Engine will not start.

· Engine not in full choke position.

· Check choke position.

 

· Out of gasoline or bad, old gasoline.

· Check gasoline.

 

· Spark Plug wire disconnected.

· Connect spark plug wire.

 

· Gas valve off.

· Turn on gas valve.

 

· Dirty air cleaner.

· Clean or replace air cleaner. Contact a

 

 

qualified service person.

Engine is locked, will not pull

· Engine problem .

· Contact an engine servicing dealer for

over.

 

engine problems.

Aim -N-Shoot TM lever sticking

· Debris stuck around cone

· Clean debis

 

· Cone adjustment knob too tight

· Apply silicone based lubricant to

 

· Adaptor mount nut (item 38) too

pivot points

 

tight

· Loosen knob

 

 

· Loosen nut

When servicing engine refer to specific manufacturers engine owner's manual. Engine warranty is covered by the specific engine manufacturer. If your engine requires warranty or other repair work contact your local servicing engine dealer. When contacting a dealer for service it is a good idea to have your engine model number available for reference (See table page 3). If you cannot locate a servicing dealer in your area you can contact the manufacturers national service organization.

To reach:

Briggs and Stratton: 800-223-3723

WARRANTY CLAIM PROCEDURE

Should a BILLY GOAT ® machine fail due to a defect in material and/or workmanship, the owner should make a warranty claim as follows:

The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing BILLY GOAT Dealer.

The owner must present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt.

The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their respective BILLY GOAT Distributor for their territory Attention: Service Manager. Any parts replaced under warranty must be tagged and retained for 90 days. The model number and serial number of the unit must be stated in the Warranty Claim.

The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration.

The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination. BILLY GOAT will notify their conclusions to the distributor service manager from whom the claim was received.

The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim is final and binding.

For online product registration go to www.billygoat.com

Part No 440179

13

Form No F041108A

Image 13
Contents Billy Goat Force Blower About this Manual ContentsSerial Plate Data Specifications F1801VGeneral Safety Instructions and Symbols Form No F041108A Vibration Data SoundIntended USE Engine Labels Instruction LabelsParts BAG Literature Assy Packing ChecklistFigure a AssemblyOperation If Your Unit Fails to Start See Troubleshooting onAdjusting AIR Director Periodic Maintenance MaintenanceWarranty Claim Procedure TroubleshootingIllustrated Parts List U S in G B a C K M O L D E D Parts ListMaintenance Record

F1801V specifications

The Billy Goat F1801V is a versatile and efficient outdoor equipment designed primarily for lawn care and landscaping professionals. This powerful vacuum features a robust Honda engine, which provides unparalleled performance and durability. With a 180cc engine capacity, the F1801V is capable of handling a wide range of debris, making it an ideal choice for anyone seeking a reliable solution for leaf and debris collection.

One of the standout features of the Billy Goat F1801V is its impressive suction power, which allows it to quickly and efficiently clear large areas of leaves, pine needles, and other debris. The 12-inch impeller is designed to maximize airflow and enhance collection efficiency. This means users can complete their tasks in less time, making it a perfect tool for professional landscapers who require a reliable machine for their day-to-day operations.

The F1801V boasts a unique debris bag system, which holds up to 40 gallons of material. This large capacity ensures that users can work for extended periods without the need for frequent dumping, boosting productivity. The bag itself is designed for easy removal and installation, allowing users to quickly empty their load and get back to work.

Moreover, the Billy Goat F1801V is equipped with a height-adjustable handle, providing comfort and ease of use for different operators. The ergonomic design minimizes strain on the back and arms, which is crucial for professionals who may be using the vacuum for long hours.

In terms of maneuverability, the F1801V features large rear wheels that enhance stability and traction on various terrains. This makes it easier to navigate uneven ground and tight spaces, ensuring that the machine can operate effectively in various landscaping environments.

The machine also incorporates advanced features such as a patented debris management system that enables efficient suction and shredding of materials, allowing for compact collection. This not only maximizes the capacity of the bag but also reduces the overall volume of debris, making disposal more convenient.

In summary, the Billy Goat F1801V is a powerful and user-friendly lawn vacuum that combines strong suction capabilities with innovative features designed for efficiency and comfort. Whether for commercial use or for serious homeowners, the F1801V stands out as a robust solution for all leaf and debris management needs. Its blend of performance, durability, and practicality makes it a valuable addition to any landscaping toolkit.