Bad Boy Mowers 48031301 manual Upper Frame Assembly Installation, Boot To Mower Deck Installation

Page 11

2-7 Upper Frame Assembly Installation

NOTE: During this step, it is suggested that two people install the upper frame to the lower mount tube.

Using two people to lift the upper frame, lift the upper frame above the lower mount tube making sure the frame is pointing away from the mower (Figure 9). Slide the upper frame tube into the lower mount tube aligning the mounting hole. Insert (1) ½” x 2-1/2” clevis pin P#(K0133) through the hole and fasten with (1) 5/32” x 2-5/8” hair pin clip P#(K0088).

2-9 Boot To Mower Deck Installation

60” Boot Plate Mounting Instructions

To mount the boot plate P#(B0184) to the boot P#(E1113) use (2) 3/8”-16 x 1” carriage bolts P#(K1182) and (2) 3/8”-16 flange nuts P#(K1215). See Figure 11 for bolt placement.

48” & 52” Boot Plate Mounting Instructions To mount the boot plate P#(B0184) to the boot P#(E1113) use (2) 3/8”-16 x 1” carriage bolts P#(K1182) and (2) 3/8”-16 flange nuts P#(K1215). See Figure 12 for bolt placement.

Figure 9.

Fasten w/

(1) ½”x 2-1/2” Clevis Pin

(1) Hair Pin Clip

NOTE: When bolting the boot and boot plate together, the head of the bolt is placed from the inside of the boot. This will prevent grass from collecting on the bolts.

For All Deck Sizes

Remove the bolts that hold the deflector shield in place so that the boot rod can fasten the boot and boot plate to the mower deck. Align the holes in the boot plate to the holes in the deflector shield mount and slide the boot rod P#(B0244) through and fasten by using (1) hair pin clip P#(K0099).

NOTE: The mower’s deflector shield is removed in the following photo for clarity. Always have the deflector shield mounted when mowing.

Lower Mount Tube

Upper

 

 

 

 

Frame

 

Fasten w/

Boot

2-8 Top Assembly To Upper Frame

Figure 11.

 

(1) Hair Pin Clip

Rod

 

 

 

Assembly Installation

Align the pivot brackets of the top assembly P#(A0551) to the pivot point on either side of the upper frame assembly. Place (1) P#(K0041) fender washer between each pivot point (Figure 10) and fasten each side by using (1) P#(K1153) 5/16”-18 x 3/4” HHCS and (1) P#(K1180) 5/16”-18 nyloc nut. When fastening leave nut slightly loose so that the top can pivot freely.

Figure 10.

Top Assembly Here

Fasten w/

(1) 5/16” x 3/4” HHCS

(1) 5/16” Nyloc Nut

(1) Fender Washer Boot Plate Per Side

Boot

Fasten w/

(2)3/8” x 1” Carriage Bolts

(2)3/8” Flange Nuts

11

Image 11
Contents $4.00 REV OPERATOR’S ManualPTO Grass Collection System Table of ContentsSafety Alert Symbol Safety Signs SafetyWhat is WARRANTED? Peco Limited Warranty for NEW ProductsPreparation Of Mower Section Introduction and DescriptionIntroduction DescriptionPTO Assembly Installation Belt Installation Lower Frame Installation Cam Assembly AdjustmentMount Tube Stiffener Installation Carriage Bolt Exploded Parts View Parts View Assembly Installation Upper Frame Assembly InstallationBoot To Mower Deck Installation Top Assembly To Upper FrameImpeller Blade Removal/Replacement Blower Cone InstallationLower Hose To Boot Installation Lengths Of Hose AdjustmentUpper Hose Installation Lower Hose To Blower Cone InstallationInstallation/Removal Collection Bags Section Operating Instructions Section MaintenanceLubrication Section Parts and ServiceParts And Service Information Safety Decals Bad Boy Page Contact Bad Boy Today

48031301 specifications

Bad Boy Mowers has made a name for itself in the lawn care industry by offering powerful, well-engineered equipment designed to meet the needs of both residential and commercial users. One of their standout models is the Bad Boy Mowers 48031301. This mower is a testament to the brand’s commitment to quality, performance, and innovative technology, delivering an impressive solution for lawn enthusiasts.

The Bad Boy Mowers 48031301 is equipped with a robust engine, specifically designed for heavy-duty performance. This feature ensures that it can tackle even the toughest mowing tasks with ease. The engine is paired with a smooth, responsive hydrostatic drive system. This technology allows for precise control over speed and direction, enabling users to navigate complex landscapes without sacrificing power.

One of the key characteristics of the Bad Boy 48031301 is its heavy-duty steel frame. This robust construction not only enhances durability but also provides stability while operating on uneven terrain. The mower features a wide cutting deck that ensures efficient mowing, allowing users to cover large areas quickly. The cutting deck is adjustable, offering various height settings to achieve the desired grass length, ensuring a refined and professional finish.

Another notable feature of the Bad Boy Mowers 48031301 is its ergonomic design. The controls are intuitively placed, allowing for seamless operation, even during extended mowing sessions. The comfortable seat is designed with support in mind, reducing fatigue and enhancing operator comfort.

Safety is a priority with the 48031301, which comes equipped with essential safety features such as an automatic blade brake system and ROPS (Roll Over Protective Structure). These enhancements ensure a safer user experience, especially on challenging terrains.

Additionally, the Bad Boy Mowers 48031301 boasts easy maintenance features. Access to the engine and blades is straightforward, simplifying routine checks and repairs. This user-friendly approach not only extends the life of the mower but makes it a practical choice for both seasoned professionals and homeowners.

In summary, the Bad Boy Mowers 48031301 stands out due to its powerful engine, robust construction, ergonomic design, safety features, and ease of maintenance. Whether you are maintaining a large lawn or a commercial property, this mower combines performance and comfort, making it an excellent investment for anyone serious about lawn care.