Lengths Of Hose Adjustment | Bad Boy Mowers 48031301 specs

2-12 Lengths Of Hose Adjustment

The hoses in steps 2-13 and 2-14 must be cut to fit your machine. Follow steps 2-13 and 2-14. Do not cut the hoses until you have tried to fit them on your machine. Remember that the hoses have to be long enough to allow for enough clamping surface between the inlet, blower assembly, and the deck boot.

2-13 Upper Hose Installation

Fasten the inlet to the plastic top by sliding the inlet from the inside of the top to the outside and lock into place. Slide a 5”-6” upper hose clamp P#(J6011) onto both ends of the 6” upper hose (Figure 15). Then slide one end of the 6” hose onto the inlet. Make sure there is about a two-inch overlap between the hose end and the container inlet. Proceed to slide the opposite end of the 6” hose onto the outlet of the blower assembly. See Figure 15 for details. Make sure both ends of the hose are clearly attached to the inlet and the blower assembly inlet. Tighten the hose clamps.

Figure 15.	Inlet	5”-6” Hose Clamps

6” Upper

Hose

	Figure 16.	Blower Housing
	Figure 16.	Blower Cone
		Blower Cone

8” Lower

Hose

7”-8” Hose	Boot
7”-8” Hose
Clamp

2-14 Lower Hose To Blower Cone Installation

Slide a 7”-8” hose clamp P#(J6006) over both ends of the lower hose. Then proceed to slide the lower hose onto the blower cone. Tighten the hose clamp. The assembly should look like Figure 16.

2-15 Lower Hose To Boot Installation

Take the unattached end of the lower hose and slide it over the circular end of the boot. Use the lower hose clamp to secure the hose to the boot (Figure 16). Tip: Before securing clamp rotate hose counter-clockwise (away from yourself) approximately 1” to add in retaining boot to mower deck.

2-16 Front Weight Installation

Slide the weight bracket assembly P#(A0597) into the mower’s front receiver hitch (Figure 17). Fasten by using

(1)5/8” x 3” clevis pin P#(K0172) and (1) 5/32” x 2-5/8” hair pin clip P#(K0088). When installing the weight bar (Figure 18) P#(B2220), you should have another person help position the weight centered onto the weight bracket assembly. Fasten the weight by using (2) 1/2”-13 U-bolts P#(K0331) and (4) 1/2”-13 flange nuts P#(K1246). Tighten all nuts and bolts.

Fasten w/

Figure 17.(1) 5/8” x 3” Clevis Pin

(1) Hair Pin Clip

Figure 18.	Fasten w/
	(2)	½” U-Bolts

	(4)	½” Flange Nuts

48031301 specifications

Bad Boy Mowers has made a name for itself in the lawn care industry by offering powerful, well-engineered equipment designed to meet the needs of both residential and commercial users. One of their standout models is the Bad Boy Mowers 48031301. This mower is a testament to the brand’s commitment to quality, performance, and innovative technology, delivering an impressive solution for lawn enthusiasts.

The Bad Boy Mowers 48031301 is equipped with a robust engine, specifically designed for heavy-duty performance. This feature ensures that it can tackle even the toughest mowing tasks with ease. The engine is paired with a smooth, responsive hydrostatic drive system. This technology allows for precise control over speed and direction, enabling users to navigate complex landscapes without sacrificing power.

One of the key characteristics of the Bad Boy 48031301 is its heavy-duty steel frame. This robust construction not only enhances durability but also provides stability while operating on uneven terrain. The mower features a wide cutting deck that ensures efficient mowing, allowing users to cover large areas quickly. The cutting deck is adjustable, offering various height settings to achieve the desired grass length, ensuring a refined and professional finish.

Another notable feature of the Bad Boy Mowers 48031301 is its ergonomic design. The controls are intuitively placed, allowing for seamless operation, even during extended mowing sessions. The comfortable seat is designed with support in mind, reducing fatigue and enhancing operator comfort.

Safety is a priority with the 48031301, which comes equipped with essential safety features such as an automatic blade brake system and ROPS (Roll Over Protective Structure). These enhancements ensure a safer user experience, especially on challenging terrains.

Additionally, the Bad Boy Mowers 48031301 boasts easy maintenance features. Access to the engine and blades is straightforward, simplifying routine checks and repairs. This user-friendly approach not only extends the life of the mower but makes it a practical choice for both seasoned professionals and homeowners.

In summary, the Bad Boy Mowers 48031301 stands out due to its powerful engine, robust construction, ergonomic design, safety features, and ease of maintenance. Whether you are maintaining a large lawn or a commercial property, this mower combines performance and comfort, making it an excellent investment for anyone serious about lawn care.