Bad Boy Mowers 48031301 manual Cam Assembly Adjustment, Mount Tube Stiffener Installation

Page 7

2-4 Cam Assembly Adjustment

Figure 7.

The cam assembly P#(A0422), which controls the blower belt tension, comes from the factory pre-adjusted. If the belt is too tight or becomes too loose, remove the hair pin clip P#(K0099) from the belt tension rod P#(K0326) and pull the “L” end of the rod out of its hole in the cam assembly. The tension rod may then be screwed out to tighten the belt or screwed in to loosen the belt. Replace the “L” end into the top hole in the cam and replace the hair pin clip. Adjust the cam stop bolt P#(K1159) to allow the cam to rotate slightly over center when the blower is disengaged (Figure 6).

Figure 6.

Cam Assy.

Lower Mount Tube

Bad Boy Receiver Hitch

Fasten Here w/

(1)5/8” x 3” Clevis Pin

(1)Hair Pin Clip

 

 

2-6 Mount Tube Stiffener Installation

 

 

Place the lower mount tube stiffener P#(B0247) between

 

 

the lower mount tube (previously installed) and the

 

 

mower’s rear frame positioning the bend flaps

 

 

downwards (Figure 8). Fasten to the mower’s rear frame

 

 

by using (2) ½”-13 x 1” HHCS P#(K1231), (2) fender

 

 

washers P#(K0041) and (2) ½”-13 flange nuts

Cam Stop

 

P#(K1246). Fasten to the lower mount tube by using (1)

Tension Rod

3/8”-16 U-bolt P#(K1432) and (2) 3/8”-16 flange nuts

Bolt

 

P#(K1215). Tighten all nuts and bolts.

 

 

2-5 Lower Frame Installation

Figure 8.

Fasten w/

(1) 3/8” U-Bolt

(2) 3/8” Flange Nuts

NOTE: Before continuing installation, you must install the Bad Boy Pup Series bolt-on hitch P#(093-1112-00) for the rear of the mower. Adding this hitch is required for mounting the collection system. Contact Bad Boy to purchase at (870) 698-0090.

Slide the short leg of the lower mount tube P#(B0246) into the Bad Boy bolt-on hitch previously installed. Align the hole in the mount tube to the bolt-on hitch and fasten by using (1) 5/8” x 3” clevis pin P#(K0172) and (1) 5/32” x 2-5/8” hair pin clip P#(K0088) (Figure 7).

Lower Mount TubeLower Mount Tube Stiffener

Fasten w/ (2) ½” x1” HHCS

(2)Fender Washers

(2)½” Flange Nuts

7

Image 7
Contents $4.00 REV OPERATOR’S ManualPTO Grass Collection System Table of ContentsSafety Alert Symbol Safety Signs SafetyWhat is WARRANTED? Peco Limited Warranty for NEW ProductsPreparation Of Mower Section Introduction and DescriptionIntroduction DescriptionPTO Assembly Installation Belt Installation Mount Tube Stiffener Installation Cam Assembly AdjustmentLower Frame Installation Carriage Bolt Exploded Parts View Parts View Assembly Installation Upper Frame Assembly InstallationBoot To Mower Deck Installation Top Assembly To Upper FrameImpeller Blade Removal/Replacement Blower Cone InstallationLower Hose To Boot Installation Lengths Of Hose AdjustmentUpper Hose Installation Lower Hose To Blower Cone InstallationInstallation/Removal Collection Bags Section Operating Instructions Section MaintenanceParts And Service Information Section Parts and ServiceLubrication Safety Decals Bad Boy Page Contact Bad Boy Today

48031301 specifications

Bad Boy Mowers has made a name for itself in the lawn care industry by offering powerful, well-engineered equipment designed to meet the needs of both residential and commercial users. One of their standout models is the Bad Boy Mowers 48031301. This mower is a testament to the brand’s commitment to quality, performance, and innovative technology, delivering an impressive solution for lawn enthusiasts.

The Bad Boy Mowers 48031301 is equipped with a robust engine, specifically designed for heavy-duty performance. This feature ensures that it can tackle even the toughest mowing tasks with ease. The engine is paired with a smooth, responsive hydrostatic drive system. This technology allows for precise control over speed and direction, enabling users to navigate complex landscapes without sacrificing power.

One of the key characteristics of the Bad Boy 48031301 is its heavy-duty steel frame. This robust construction not only enhances durability but also provides stability while operating on uneven terrain. The mower features a wide cutting deck that ensures efficient mowing, allowing users to cover large areas quickly. The cutting deck is adjustable, offering various height settings to achieve the desired grass length, ensuring a refined and professional finish.

Another notable feature of the Bad Boy Mowers 48031301 is its ergonomic design. The controls are intuitively placed, allowing for seamless operation, even during extended mowing sessions. The comfortable seat is designed with support in mind, reducing fatigue and enhancing operator comfort.

Safety is a priority with the 48031301, which comes equipped with essential safety features such as an automatic blade brake system and ROPS (Roll Over Protective Structure). These enhancements ensure a safer user experience, especially on challenging terrains.

Additionally, the Bad Boy Mowers 48031301 boasts easy maintenance features. Access to the engine and blades is straightforward, simplifying routine checks and repairs. This user-friendly approach not only extends the life of the mower but makes it a practical choice for both seasoned professionals and homeowners.

In summary, the Bad Boy Mowers 48031301 stands out due to its powerful engine, robust construction, ergonomic design, safety features, and ease of maintenance. Whether you are maintaining a large lawn or a commercial property, this mower combines performance and comfort, making it an excellent investment for anyone serious about lawn care.