Page 6 | High PoE Midspan and Splitters Installation Guide |
Installation
1.Connect the AXIS T8123 to an AC outlet
2.Connect the unit Data In jack (input) to your remote Ethernet network switch using an Ethernet cable.
3.Connect the Data & Power Out jack (output) to your Axis splitter or camera, using an Ethernet cable.
Data and Power |
| out | Data in | |
|
|
| ||
|
|
|
|
|
Port connectivity indicator
AC Input connectivity indicator
Output port | Input port |
Camera/splitters | Ethernet |
Indicators
LED | Color | Indication | |
|
|
|
|
Port | Unlit | No camera connected | |
|
|
|
|
|
| Flashing | Power overload or other input voltage error |
|
|
|
|
|
| Steady green | Camera connected, normal behavior |
|
|
|
|
|
| Green 1 Hz blinking | Over current or short circuit condition on the port |
|
|
|
|
|
| Green 4 Hz blinking | PSE input voltage out of range or other internal fault |
|
|
| |
AC input | Steady green | AC power connected | |
|
|
|
|