Axis Communications T8126 Mounting instructions, 8 to 7.0 mm 0.23 to 0mm 5mm to 2.5 mm 0.059 to

High PoE Midspan and Splitters Installation Guide Page 9

Mounting instructions

The AXIS T8123 may be wall or bench mounted using the rear side holes.

Note the following before mounting the AXIS T8123 to a fixed location:

•Do not cover the midspan or block the airflow to the product with any foreign object. Keep the midspan away from excessive heat and humidity, and free from vibration and dust.

•Ensure that the cable length from the Ethernet network source to your Axis video product does not exceed 100 meters (333 feet). The midspan is not a repeater and does not amplify the Ethernet data signal.

•Use a splitter if desired, but ensure that the splitter is connected close to your Axis video product and not to the Midspan.

•There is no "on-off" switch; simply plug the AXIS T8123 into an AC power outlet.

To mount:

1. Install two screws vertically at a distance of 9.17 cm (3.61”) on the wall or shelf.

ENGLISH

2.Align the AXIS T8123 mounting slots to capture the surface screws.

A5.8 to 7.0 mm (0.23" to 0.27")

B2.0mm (0.08")

C1.5mm to 2.5 mm (0.059" to 0.098")

D3.0 mm (0.12")

A

B

C

D