Arrow Plastic PD108-A, SA108-A, NW108-A, EN108-A, HM108-A, NP108 Anchoring Down The Building

Page 10

Anchoring

A10

Anchoring Down The Building

It is important that the entire floor frame be anchored after the building is erected.

Below are recommended ways of anchoring.

Arrow Anchoring Kit: (Model No. AK4 or 60298) Recommended for use with any suggested base. Contains: 4 Anchors with Cable, Clamps and installation instruction.

OVER THE BEAMS

AND INTO THE GROUND

Arrow Anchoring Kit: (Model No. AK100 or 68383) Recommended for use with the concrete foundation. Contains: Corner gussets, perimeter clips, hardware, 1/4" masonary drill bit and installation instruction.

AnchoringintoWood/Post:

Use 1/4" Wood Screws. There are 1/4" (0,63cm) dia. holes provided in the frames for proper anchoring.

1.2.

AnchoringintoConcrete:

1.For poured concrete slab or footing or patio blocks: Use 1/4" x 2" Lag Screws.

2.For Anchor Post of Concrete poured after building is erected: Use 1/4" x 6" Lag Screws.

1.2.

Image 10

Contents Roof Edge to Roof Edge Before YOU Begin Plan Ahead Required Eye Goggles No Phillips ScrewdriverSafety First Care & Maintenance Other TipsAccessories Roof Strengthening heavy snow load KitsThis WAS Left Blank Intentionally This WAS Left Blank Intentionally Foundation Foundation For Your BuildingAnchoring Anchoring Down The BuildingHardware Parts List Assembly by Key No Place the front floor frames as StepFloor Frame Assemblies Overlap the side floor framesMake two side wall channels by Frame AssembliesOverlap the rear wall channel Overlap the rear wall angleRoof Beam Assemblies Door Track Assembly Using the door track spliceFloor Frame Corners Attach the front wall panels toFasten the rear wall angle as Fasten the door track assemblyFrames Fasten the rear wall channel asWall Panels Front Channel/Door Jamb Fasten the front wall channelsGable Assemblies Gables/Braces Join the left and right gablesRoof Beams Fasten the single roof beamsRight Roof Panel If a Roof Beef-Up Kit wasRoofAssembly Ridge Caps & Panels Roof Trim Attach the right and left side roofDoor Assembly Door Installation & Adjustment Repeat steps 1 through 3 for Left doorSome Facts about Rust

VN108-A, MN108-A, NP108, HM108-A, EN108-A specifications

Arrow Plastic NP108, EN108-A, PD108-A, HM108-A, and VN108-A are prominent products in the versatile world of plastic solutions. These items represent a blend of innovative design, advanced technology, and unparalleled characteristics, making them essential components across various industries.

The NP108 model is renowned for its lightweight yet durable construction. It is designed to withstand environmental stressors, showcasing excellent resistance to abrasion and impact. This feature makes NP108 ideal for applications requiring a balance between weight and strength, like packaging and lightweight structural components. Additionally, NP108 is manufactured using eco-friendly processes, ensuring minimal environmental impact.

EN108-A stands out for its exceptional energy efficiency. It employs breakthrough technology that minimizes energy consumption during production without sacrificing quality. The enhanced insulation properties of EN108-A decrease thermal conductivity, making it suitable for applications in the construction and energy sectors where energy conservation is a primary concern. Moreover, this model provides excellent UV resistance, ensuring long-lasting performance even in harsh outdoor settings.

PD108-A is engineered for precision and versatility. Its polymers are specially formulated to provide high clarity and good chemical resistance, which is particularly important in medical and pharmaceutical packaging. This model ensures compliance with stringent health and safety regulations, further enhancing its appeal within the medical supply chain. PD108-A also features an easy-to-process design, enabling streamlined manufacturing and customization options.

HM108-A is a heavy-duty model crafted for industrial applications. It possesses superior tensile strength and durability, allowing it to perform under extreme conditions. This version is designed to withstand heavy loads, making it an excellent choice for manufacturing and transport operations. Its ability to resist corrosive substances significantly extends the product life cycle, offering manufacturers cost-effective solutions over time.

Finally, VN108-A is specifically engineered for advanced technological applications. It features enhanced electrical properties suitable for electronic and telecommunications uses. The model is characterized by its high dielectric strength and low dissipation factor, ensuring reliable performance in sensitive electronic environments. VN108-A's adaptability to various manufacturing processes adds to its versatility, enabling its use in sophisticated electrical devices and systems.

In conclusion, Arrow Plastic NP108, EN108-A, PD108-A, HM108-A, and VN108-A offer a comprehensive range of features and technologies catering to diverse industry applications. Their robustness, energy efficiency, compliance with safety standards, and adaptability make them superior choices in the ever-evolving landscape of plastic materials and solutions.