Ariens 915173 ZOOM XL 54, 915165 ZOOM XL 48 Safety Alerts, Notations, Safety Decals Locations

Page 4

SAFETY

WARNING: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the safety instructions in the manuals and on decals could result in serious injury or death.

Slopes are a major factor related to loss-of-control and tip-over accidents. Operation on all slopes requires extra caution.

Tragic accidents can occur if the operator is not alert to the presence of children. Never assume that children will remain where you last saw them.

Gasoline is extremely flammable and the vapors are explosive, handle with care.

Disengage attachment, stop unit and engine, remove key, engage parking brake, and allow moving parts to stop before leaving operator’s position.

SAFETY ALERTS

Look for these symbols to point out important safety precautions. They mean:

Attention!

Personal Safety Is

Involved!

Become Alert!

Obey The Message!

The safety alert symbol is used in decals and with this manual. Understand the safety message. It contains important information about personal safety.

DANGER: IMMINENTLY HAZARDOUS SITUATION! If not avoided, WILL RESULT in death or serious injury.

WARNING: POTENTIALLY HAZARDOUS SITUATION! If not avoided, COULD RESULT in death or serious injury.

CAUTION: POTENTIALLY HAZARDOUS SITUATION! If not avoided, MAY RESULT in minor or moderate injury. It may also be used to alert against unsafe practices.

NOTATIONS

NOTE: General reference information for proper operation and maintenance practices.

IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment.

SAFETY DECALS AND

LOCATIONS

ALWAYS replace missing or damaged Safety Decals. Refer to figure 3 for Safety Decal locations.

GB - 4

Image 4
Contents Zoom XL Table of Contents IntroductionUnauthorized Replacement Parts Product RegistrationDelivery DisclaimerSafety Safety AlertsSafety Decals Locations NotationsKeep people away from unit while operating Hot Surfaces Serious Injury or DeathSafety Rules Emission Control SystemPage Page Assembly Adjust Seat Check Safety Interlock SystemCheck Engine Oil Level Level Mower DeckControls and Features Controls and Features OperationSteering Levers Mower Lift PedalAdjusting Seat Filling Fuel TankGasoline Stopping in AN EmergencyMoving Unit Manually Starting and Shutting OFF EngineOperating Mower Transporting UnitMaintenance Schedule Interval Task ActionTipping Seat Forward Service and AdjustmentsHours or Every Season Opening Deck Access Plate Leveling and Adjusting Pitch of Mower DeckOpening and Closing Hood Replacing Mower BladeForward Pitch Of The Mower Blades Pitch Of The Mower Blades From Side-To-SideForward Pitch of Mower Blades Side-To-Side PitchServicing Battery Battery Removal and Installation RemoveCharging the Battery Cleaning Battery and Battery CablesJump-Starting Adjusting Steering Levers Replacing PTO Belt Replacing Hydrostatic Belt Check Hydraulic Fluid LevelTo Add Hydraulic Fluid Change Hydraulic Fluid and FilterPurging the Hydraulic System Storage Short Term StorageLong Term Storage Fuel SystemTroubleshooting PTO or mower Blades do notOff EngineService Parts AccessoriesPoor cutting QualitySpecifications Consumer Mowing Equipment Limited Warranty Limitation of Remedy and Damages Your Warranty Rights and Obligations Evaporative Emission Warranty Parts List DisclaimerAriens West Ryan Street Brillion, WI 54110-1072