Stopping in AN Emergency

WARNING: THROWN OBJECTS can result in personal injury and/or property damage. ALWAYS position discharge chute and deﬂector in safe direction and angle before starting engine. DO NOT allow anyone in front of unit during operation. Be familiar with area of operation.

IMPORTANT: DO NOT force frozen chute controls. Start engine and run for 3-5 minutes. If still frozen, take unit to a warm place to thaw.

Discharge Chute Deﬂector

The discharge chute deﬂector controls how high snow is thrown.

CAUTION: THROWN OBJECTS can cause personal injury and/or property damage. DO NOT throw snow any higher than necessary

If chute deﬂector does not stay in set position, adjust as directed in Service and Adjustments, or repair before operation.

Use handle at rear of deﬂector to position deﬂector at desired height.

Push down handle to increase height of discharge. Pull up on handle to decrease height of discharge.

Handlebars

Adjust upper handlebar by selecting alternate holes for "J" Bolts.

Tighten handlebar knobs to secure upper handlebar. The upper handlebar can be folded for storage.

Scraper Blade

The scraper blade allows the back of the housing to keep better contact with the surface being cleared. It also prevents damage to the housing from normal wear.

IMPORTANT: DO NOT allow scraper blade to wear down too far or auger housing will become damaged.

Fuel Level Indicator

The fuel level indicator is an extension of the fuel tank that allows you to see the level of fuel in the tank without removing the fuel cap.

Immediately release auger clutch bail to stop unit movement.

Stop Engine, remove Key and wait for all rotating parts to stop before leaving operators position.

BEFORE STARTING ENGINE

WARNING: IMPROPER CLOTHING AND SAFETY GEAR could result in death or serious injury. Wear adequate winter gear, protective gloves and footwear which will improve footing on slippery surfaces. DO NOT wear loose clothing or jewelry and tie back hair that may get caught in rotating parts.

THROWN OBJECTS could result in death or serious injury. Wear safety goggles to protect eyes.

CAUTION: THROWN OBJECTS can result in personal injury and/or property damage. DO NOT throw snow any higher than necessary.

1. Check for Frozen Auger

•With key in "Stop" position, squeeze auger clutch bail to Engaged position and pull recoil starter handle.

•If you cannot pull starter handle, auger is frozen. Move unit to a heated area to thaw to prevent possible damage.

2. Check Function of Clutches

WARNING: FAILURE OF CLUTCHES OR BRAKES may result in death or serious injury. Check clutch and brake function before each use. Repair or adjust before operation.

With key in "Stop" position, squeeze auger clutch bail to Engaged position and pull recoil starter handle. Auger should rotate with the turning of the engine. Release the auger clutch bail.

If the auger clutch bail moves freely with no resistance before contacting handlebar, adjust or repair before operation.

3. Check Engine Fuel Level

WARNING: FLAMMABLE FUEL and its EXPLOSIVE VAPORS can cause death or serious injury. handle fuel with extreme care. ALWAYS use an approved fuel container. NO Smoking! NO Lighted Materials! NO Open Flames! Allow engine to cool before any service.

Add fuel if required. Refer to Filling the Fuel Tank.

GB - 10

938016 - 522 specifications

Ariens is a well-known name in the outdoor power equipment industry, particularly for its reliable snow blowers. The Ariens 938016 - 522, specifically designed for residential use, exemplifies the brand's commitment to quality, performance, and user-friendly technology. This model is equipped to handle heavy snowfall, making it a dependable choice for homeowners in snowy regions.

At the heart of the Ariens 938016 - 522 is a powerful 2-stage snow throwing system. This advanced system consists of an auger that collects snow and ice and a high-speed impeller that expels it through the chute, providing efficient clearing even in deep snow conditions. The 522 model features a 24-inch clearing width, allowing for quick and effective snow removal. Its height-adjustable skid shoes let you change the clearance level to suit different surfaces, ensuring optimal performance whether you're clearing gravel, pavement, or concrete.

Ariens innovatively incorporates a reliable 306 cc engine, offering robust power to tackle tough winter storms easily. The engine is designed for easy starting, even in cold weather conditions, minimizing frustrating delays when snow starts to pile up. Additionally, the machine features a compact design that allows for maneuverability in tight spaces, making it ideal for driveways and sidewalks.

Another noteworthy feature is the drive system, which includes six forward speeds and two reverse speeds. This gives users the ability to customize their snow clearing pace according to the workload and snow conditions. The ergonomically designed controls provide comfort and ease of use, allowing operators to manage functions without straining their hands or wrists.

The Ariens 938016 - 522 also boasts a snow chute that can be easily adjusted from the operator's position, providing optimal control in directing the snow where desired. The chute is designed with a comfortable, friction-reducing design, ensuring smooth operation.

Durability is a hallmark of the Ariens brand, and this model is no exception. Constructed with high-quality materials, it is built to withstand the rigors of winter. In addition, the snow blower features a 3-year limited warranty, reflecting the manufacturer’s confidence in its longevity and performance.

In conclusion, the Ariens 938016 - 522 combines power, efficiency, and user-friendly features to deliver a superior snow clearing experience. With its robust engine, effective 2-stage system, and thoughtful design, this snow blower is a reliable companion for tackling winter weather challenges. Whether you're dealing with light flurries or heavy snowfalls, the Ariens 938016 - 522 is an excellent choice for maintaining clear and safe outdoor spaces.