Ariens 938016 - 522 manual Safety Rules

Page 6

SAFETY RULES

Walk Around Inspection

Complete a walk around inspection of unit and work area to understand:

Work area.

Your unit.

All safety decals.

Work Area

ALWAYS check overhead and side clearances carefully before operation. ALWAYS be aware of traffic when operating along streets or curbs.

Keep children and people away. Keep children out of work area and under watchful care of a responsible adult.

DO NOT allow adults to operate unit without proper training.

Keep area of operation clear of all toys, pets, and debris. Thrown objects can cause injury.

Check for weak spots on dock, ramps or floors. Avoid uneven work areas and rough terrain. Stay alert for hidden hazards.

Always be sure of your footing, especially when operating in reverse. Walk, never run during operation.

Falling snow, fog, etc. can reduce vision and cause an accident. Operate unit only when there is good visibility and light.

Unit

ALWAYS keep protective structures, guards, and panels in good repair, in place and securely fastened. NEVER modify or remove safety devices.

Check clutch and brake operation frequently. Adjust and service as required. Auger must stop quickly when control bail is released.

Use only approved extension cords and receptacles when starting units equipped with Electric starter. DO NOT connect electric starter cord to any wiring system that is not a three wire grounded system.

Operation

Understand:

How to operate all controls

The functions of all controls

How to STOP in an Emergency

Before starting engine, disengage control(s).DO NOT operate at too fast a rate.

DO NOT change engine governor settings or over-speed engine.

Slow down and turn corners slowly.

Disengage attachment drive when traveling from one work area to another.

ALWAYS allow unit and engine to adjust to outdoor temperatures before clearing snow.

ALWAYS disengage attachment drive, stop unit and engine, remove key, allow moving parts to stop before leaving operator’s position for any reason.

Run unit a few minutes after clearing snow to prevent freeze-up of attachment.

Disengage attachment when not in use.

Do not operate in reverse unless absolutely necessary. ALWAYS back up slowly. Always look down and behind before and while backing.

Never leave a running unit unattended. ALWAYS shut off engine before leaving unit. ALWAYS remove key to prevent unauthorized use.

Never carry passengers.

Avoid uneven and rough terrain. DO NOT operate near drop offs, ditches, or embankments. Unit can suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Abnormal Vibrations are a warning of trouble. Striking a foreign object can damage unit. Immediately stop unit and engine. Remove key and wait for all moving parts to stop. Remove wire from spark plug. Inspect unit and make any necessary repairs before restart.

Hazardous Slopes

DO NOT operate on steep slopes. DO NOT clear snow across the face of slopes. Keep all movement on slopes slow and gradual. DO NOT make sudden changes in speed or direction.

DO NOT park unit on a slope unless absolutely necessary. When parking on a slope always block the wheels.

Child Safety

NEVER allow children to operate or play on or near unit. Be alert and shut off unit if children enter area.

Personal Safety

Only trained adults may operate unit.

Training includes actual operation.

NEVER operate unit after or during the use of medication, drugs or alcohol. Safe operation requires your complete and unimpaired attention at all times.

NEVER allow anyone to operate this unit when their alertness or coordination is impaired.

DO NOT operate unit without wearing adequate winter outer garments. Wear adequate safety gear and protective gloves. Wear proper footwear to improve footing on slippery surfaces.

Protect eyes, face and head from objects that may be thrown from unit. Wear appropriate hearing protection.

Avoid sharp edges. Sharp edges can cut. Moving parts can cut off fingers or a hand.

GB - 6

Image 6
Contents Sno-Thro Controls and Features EnglishTable of Contents IntroductionSafety Safety Decals and Locations SafetySafety Rules Storage ServiceCleaning TransportChecklist AssemblyAssembly Tools RequiredControls and Features OperationStopping in AN Emergency Before Starting EngineElectric Start optional Starting and ShutoffManual Start ShutoffTo Transport Unit To Throw SnowTo Travel to Another Work Area Filling the Fuel TankMaintenance To Adjust Discharge Chute Deflector Service and AdjustmentsService Position To Adjust Belt FingerTo Adjust Auger Control Cable To Adjust Idler Position Adjust Belt FingerUnit TroubleshootingStorage EngineSpecifications AccessoriesService Parts Year Limited Warranty Disclaimer of Further WarrantyDURA-CLEAN Auger Limited Lifetime Warranty
Related manuals
Manual 14 pages 33.72 Kb

938016 - 522 specifications

Ariens is a well-known name in the outdoor power equipment industry, particularly for its reliable snow blowers. The Ariens 938016 - 522, specifically designed for residential use, exemplifies the brand's commitment to quality, performance, and user-friendly technology. This model is equipped to handle heavy snowfall, making it a dependable choice for homeowners in snowy regions.

At the heart of the Ariens 938016 - 522 is a powerful 2-stage snow throwing system. This advanced system consists of an auger that collects snow and ice and a high-speed impeller that expels it through the chute, providing efficient clearing even in deep snow conditions. The 522 model features a 24-inch clearing width, allowing for quick and effective snow removal. Its height-adjustable skid shoes let you change the clearance level to suit different surfaces, ensuring optimal performance whether you're clearing gravel, pavement, or concrete.

Ariens innovatively incorporates a reliable 306 cc engine, offering robust power to tackle tough winter storms easily. The engine is designed for easy starting, even in cold weather conditions, minimizing frustrating delays when snow starts to pile up. Additionally, the machine features a compact design that allows for maneuverability in tight spaces, making it ideal for driveways and sidewalks.

Another noteworthy feature is the drive system, which includes six forward speeds and two reverse speeds. This gives users the ability to customize their snow clearing pace according to the workload and snow conditions. The ergonomically designed controls provide comfort and ease of use, allowing operators to manage functions without straining their hands or wrists.

The Ariens 938016 - 522 also boasts a snow chute that can be easily adjusted from the operator's position, providing optimal control in directing the snow where desired. The chute is designed with a comfortable, friction-reducing design, ensuring smooth operation.

Durability is a hallmark of the Ariens brand, and this model is no exception. Constructed with high-quality materials, it is built to withstand the rigors of winter. In addition, the snow blower features a 3-year limited warranty, reflecting the manufacturer’s confidence in its longevity and performance.

In conclusion, the Ariens 938016 - 522 combines power, efficiency, and user-friendly features to deliver a superior snow clearing experience. With its robust engine, effective 2-stage system, and thoughtful design, this snow blower is a reliable companion for tackling winter weather challenges. Whether you're dealing with light flurries or heavy snowfalls, the Ariens 938016 - 522 is an excellent choice for maintaining clear and safe outdoor spaces.