To Throw Snow, To Travel to Another Work Area

TO THROW SNOW

CAUTION: HIDDEN HAZARDS may result in minor or moderate injury and/or damage to unit. Stay alert for holes, rocks, roots, trafﬁc, and other hazards.

To propel unit and throw snow:

1.Start engine.

2.Squeeze auger clutch bail against handlebar to engage auger.

3.Lift handlebar so auger contacts surface to be cleared. Lift the handlebar only high enough to propel unit forward.

NOTE: Do not lift so high to allow snow to kick back from under unit.

Tips for Operation

Snow is best removed as soon as possible after a snow fall.

To clear an area, run unit in an overlapping series of paths. For large areas; start in the middle and throw snow to each side, so snow is not cleared more than once.

ALWAYS direct snow away from area to be cleared and with direction of the wind.

IMPORTANT: DO NOT overload unit capacity by attempting to clear snow at too fast a rate.

TO TRAVEL TO ANOTHER WORK AREA

1.Release auger clutch bail to disengage auger.

2.Press down on handlebar enough to raise front of unit slightly off the ground and push or pull unit.

TO TRANSPORT UNIT

Use extra care when loading or unloading unit onto trailer or truck.

Secure unit chassis to transport vehicle. NEVER secure by rods or linkages that could be damaged.

Always shutoff engine for transport.

FILLING THE FUEL TANK

Check fuel level by looking at fuel level indicator on rear of unit. Add fuel as required.

WARNING: FLAMMABLE FUEL and its EXPLOSIVE VAPORS can result in death or serious injury.

Handle fuel with extreme care.

ALWAYS use an approved fuel container.

No Smoking! No Lighted Materials! No Open Flames!

Allow engine to cool before any service.

ALWAYS clean up any spilled fuel.

To add fuel to fuel tank:

IMPORTANT: Two cycle engines require that oil be mixed with fuel. Failure to mix oil with fuel will result in seizure and severe damage to engine. DO NOT use gasohol or gasoline containing alcohol because alcohol will cause internal parts to deteriorate. See Engine Manual for correct type and grade of fuel.

1.ALWAYS place unit in open or well ventilated area.

2.Stop engine and allow to cool.

3.See engine manual for proper fuel/oil mixture.

4.Clean fuel cap and surrounding area to prevent dirt from entering fuel tank.

5.Remove cap.

6.Fill fuel tank with mixture. Tank capacity is 1.2 quarts (1.1 liters).

NOTE: Fuel mixture left standing for prolonged periods will begin to separate; thoroughly shake mixture before use.

7. Replace fuel cap and tighten.

GB - 12

938016 - 522 specifications

Ariens is a well-known name in the outdoor power equipment industry, particularly for its reliable snow blowers. The Ariens 938016 - 522, specifically designed for residential use, exemplifies the brand's commitment to quality, performance, and user-friendly technology. This model is equipped to handle heavy snowfall, making it a dependable choice for homeowners in snowy regions.

At the heart of the Ariens 938016 - 522 is a powerful 2-stage snow throwing system. This advanced system consists of an auger that collects snow and ice and a high-speed impeller that expels it through the chute, providing efficient clearing even in deep snow conditions. The 522 model features a 24-inch clearing width, allowing for quick and effective snow removal. Its height-adjustable skid shoes let you change the clearance level to suit different surfaces, ensuring optimal performance whether you're clearing gravel, pavement, or concrete.

Ariens innovatively incorporates a reliable 306 cc engine, offering robust power to tackle tough winter storms easily. The engine is designed for easy starting, even in cold weather conditions, minimizing frustrating delays when snow starts to pile up. Additionally, the machine features a compact design that allows for maneuverability in tight spaces, making it ideal for driveways and sidewalks.

Another noteworthy feature is the drive system, which includes six forward speeds and two reverse speeds. This gives users the ability to customize their snow clearing pace according to the workload and snow conditions. The ergonomically designed controls provide comfort and ease of use, allowing operators to manage functions without straining their hands or wrists.

The Ariens 938016 - 522 also boasts a snow chute that can be easily adjusted from the operator's position, providing optimal control in directing the snow where desired. The chute is designed with a comfortable, friction-reducing design, ensuring smooth operation.

Durability is a hallmark of the Ariens brand, and this model is no exception. Constructed with high-quality materials, it is built to withstand the rigors of winter. In addition, the snow blower features a 3-year limited warranty, reflecting the manufacturer’s confidence in its longevity and performance.

In conclusion, the Ariens 938016 - 522 combines power, efficiency, and user-friendly features to deliver a superior snow clearing experience. With its robust engine, effective 2-stage system, and thoughtful design, this snow blower is a reliable companion for tackling winter weather challenges. Whether you're dealing with light flurries or heavy snowfalls, the Ariens 938016 - 522 is an excellent choice for maintaining clear and safe outdoor spaces.