American Standard 2425LC-LHO Model 2425L-LHO Shown, General Specifications for 2425L Whirlpool

LIFETIME™ 5' X 32" IA-LHO/RHO

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

Model 2425L-LHO Shown

60"
(1524mm)		10-1/2"
				(267mm)
3"			7-1/2"
	(76mm)	(191mm)

16"

(406mm)

6"

(152mm)

	32"
CUT OUT IN FLOOR
	(813mm)
FOR DRAIN

13-1/2"

(343mm)

32"

(813mm)C/L OF OVERFLOW

21-1/2"

(546mm)

20-1/2"(H)

(521mm)

19-1/8"(A)

(486mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE

OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

GENERAL SPECIFICATIONS FOR 2425L WHIRLPOOL

INSTALLED SIZE		60 x 32 x 20-1/2 (1524 x 813 x 521mm)
WEIGHT								92 Lbs. (42 Kg.)
WEIGHT w/WATER						675 Lbs. (306 Kg.)
GAL. TO OVERFLOW								70 Gal. (265 L.)
WHIRLPOOL MIN. OPERATING VOL.								39 Gal. (148 L.)
BATHING WELL AT SUMP					42 x 22 (1067 x 559mm)
BATHING WELL AT RIM				53 x 25-1/2 (1346 x 648mm)
WATER DEPTH TO OVERFLOW							17-1/2 (445mm)
FLOOR LOADING			51 Lbs./Sq.Ft. (247 Kgs./Sq.m)
(PROJECTED AREA)
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP					1.4 HP, 9.7 AMPS,120V.

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

	HD-8
© 2007 American Standard Inc.		Revised 7/07