American Standard 2902.XXXW Series installation instructions Typical Corner Installation

Page 2

INSTALLATION AND FRAMING INSTRUCTIONS

The variety of installations possible for this whirlpool may require framing procedures other than those shown. Locate studs as required. Ensure roughing-in dimensions are proper, plumb and square. Provisions must be made in all installations for an access opening for servicing the pump and controls. It is strongly recommended that an additional opening be provided for access to the drain components.

1.Position the whirlpool into the installation opening and level the deck, shimming the integral support feet as necessary.

2.Install drain components to the whirlpool following the manufacturers instructions. Before replacing your whirlpool for final installation, be certain that an opening has been provided in the sub-floor for the drain. See the roughing-in drawing for suggested opening size and location dimensions.

3 . Replace whirlpool and re-shim the integral support feet, shimming the entire length of the support feet. Secure the shims using construction adhesive, silicone, mortar or equivalent materials. While not a necessity, the use of a foundation base consisting of cement (e.g. Sakrete), mortar, or grout will help provide a solid and secure installation.

TYPICAL CORNER INSTALLATION

56-3/4"

56-3/4"

(1441 mm)

(1441 mm)

LEVELING SURFACE

WATERPROOF

SEALANT

 

20-1/2"

 

 

(521 mm)

 

BATH

HEIGHT OF FRAMEWORK

 

 

 

SUNKEN OR ISLAND

INCLUDES PLYWOOD,

 

TILES,ETC.

FRONT OR SIDE

INSTALLATION

 

 

ACCESS PANEL

 

 

REQUIRED FOR

 

SEE CUTOUT TEMPLATE PROVIDED

PUMP SERVICING.

 

 

UNLESS AN ACCESS OPENING OF AT LEAST 12" X 24" (305 X 610MM) IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED

752460-100 REV. E

(2) SPIC AND SPAN® IS A REGISTERED TRADEMARK OF PROCTER & GAMBLE

Image 2
Contents Series Whirlpool Installation Instructions General Installation InformationTypical Corner Installation Installation and Framing InstructionsElectrical Diagram Read and Follow ALL Instructions Electrical Installation InstructionsHarsh Chemicals should Never be Used on Acrylic Surfaces Post Installation CLEAN-UPDrain Connection and System Test

2902.XXXW Series specifications

The American Standard 2902.XXXW Series is a well-regarded line of toilets that exemplifies modern design and efficiency. Renowned for its exceptional performance and innovative features, the series aims to provide a superior bathroom experience.

One standout characteristic of the 2902.XXXW Series is its sleek and contemporary design. The toilets in this collection feature a streamlined silhouette, allowing them to seamlessly integrate into a variety of bathroom styles, from modern to traditional. The aesthetic appeal of these toilets is complemented by high-quality materials that ensure durability and longevity.

A major highlight of the 2902.XXXW Series is its impressive flushing technology. Equipped with the renowned AquaTitan™ system, these toilets utilize a powerful flush mechanism that ensures effective waste removal while minimizing water usage. This incredible efficiency translates to a sustainable solution, as the toilets are designed to meet WaterSense® criteria. As a result, users can save on water bills while contributing to environmental conservation.

Comfort is another key feature of the 2902.XXXW Series, with a chair-height design that enhances accessibility. This elevation makes it easier for individuals of all ages and abilities to use the toilet comfortably. The elongated bowl design further contributes to this comfort, providing users with a spacious seating area.

The 2902.XXXW Series also emphasizes ease of installation and maintenance. With a simple two-piece design, the setup process is straightforward, making it a preferred choice for both homeowners and professionals. Additionally, the smooth surface of the toilet makes cleaning hassle-free, as it minimizes the accumulation of dirt and grime.

Moreover, this series incorporates advanced materials that are resistant to stains and scratches, ensuring the toilet maintains its pristine appearance for years to come. With an array of finishes available, users can choose options that suit their personal style and bathroom décor.

In conclusion, the American Standard 2902.XXXW Series combines style, comfort, and innovative technology, making it an excellent choice for anyone seeking a reliable and aesthetically pleasing toilet solution. Its commitment to efficiency, ease of use, and modern design ensures that it meets the demands of today’s households while promoting sustainability and comfort in everyday life.