HERITAGE 5' x 42"™
HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS
2805.XXXW
SERIES WHIRLPOOL
INSTALLATION INSTRUCTIONS
| 1524mm |
|
| (60) |
|
762mm | INTEGRAL |
|
FITTING DECK | 152mm | |
(30) |
| |
| (6) | |
|
| |
305mm |
| C/L OF |
(12) |
| |
|
| DRAIN |
|
| PUMP |
1067mm | 178mm x 381mm |
|
(7 x 15) |
| |
(42) |
| |
FLOOR |
| |
| PROVIDE ACCESS | |
| CUTOUT | |
|
| TO PUMP FOR |
|
| SERVICE ON ALL |
|
| INSTALLATIONS |
|
| ON/OFF |
|
| SWITCH |
|
| 19mm |
|
| (3/4) |
| OUTLINE OF CUTOUT | |
| 1486mm x 1029mm |
|
|
| |
THANK YOU...
for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.
To insure maximum performance and pleasure from this product, please follow the instructions and cautions.
List of Optional Components (not included):
• | 5 Foot Apron* |
• |
|
51mm(2) REMOVABLE BLANK
546mm
495mm
ROUGH
FLOOR
INTEGRAL
FEET
SUPPORT
LEVELING STRINGER
NOT FOR SUPPORT
133mm 
C/L OF
OVERFLOW
64mm
THREADS
TAILPIECE121mm
*see your American Standard Distributor
List of Required Components (not included):
•Drain 1583.470*
•Bath Filler*
* see your American Standard Distributor
List of Required Tools and Supplies:
GENERAL SPECIFICATIONS FOR 2805 WHIRLPOOL
INSTALLED SIZE | 60 x 42 x | ||||||||||
WEIGHT |
|
|
| 130 Lbs. (59 Kg.) | |||||||
WEIGHT w/WATER |
|
|
| 689 Lbs. (310 Kg.) | |||||||
GAL. TO OVERFLOW |
|
|
| 64 Gal. (243 L) | |||||||
WHIRLPOOL MIN. OPERATING VOL. |
|
| 52 Gal. (197 L) | ||||||||
BATHING WELL AT SUMP |
|
|
| 43 x 22 In. (1092 x 559mm) | |||||||
BATHING WELL AT RIM |
| 55 x | |||||||||
WATER DEPTH TO OVERFLOW |
|
| 15 In. (381mm) | ||||||||
FLOOR LOADING |
|
| 39 Lbs./Sq.Ft. (191 Kgs./Sq.m) | ||||||||
(PROJECTED AREA) |
|
|
|
|
|
| |||||
PTS. |
|
|
|
| 27.8 | ||||||
CUBE (FT3) |
|
|
| 47.4 | |||||||
|
|
| |||||||||
|
| WHIRLPOOL ELECTRICAL SPECIFICATIONS | |||||||||
SYSTEM I PUMP |
|
|
|
|
| 1.6 HP, 9.7 AMPS ,120V. | |||||
SYSTEM II PUMP |
|
|
|
| 2.1 HP, 15.6 AMPS ,120V. | ||||||
|
|
|
| ||||||||
GENERAL INSTALLATION INFORMATION
Tools | Supplies | ||
• | Level | • | Nails |
• | Tape Measure | • | Putty |
• | Pipe Wrench | • | Caulking (waterproof) |
• | Slip Joint Pliers | • | 1 x 3 or 2 x 2 |
• | Screw Driver |
| Stringers |
• | Standard | • | Drop Cloth |
| Woodworking Tools | • | 15 or 20 amp GFCI |
• | Personal Safety |
| Outlet |
| Equipment | • | Cement, Plaster, |
• | Caulking Gun |
| Grout |
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
© American Standard Inc. 2004