American Standard 2425E SERIES installation instructions General Installation Information

WILLIAMSBURG ELITE 5' x 32"™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2425E SERIES WHIRLPOOL

INSTALLATION INSTRUCTIONS

10-1/4

(260mm)

3/4

(19mm)

FINISHED

SEE FITTING WALL SPECS FOR DIMENSIONS

32

12 (305mm)

60

(1524mm)

9

(229 mm)

PUMP

ON/OFF

SWITCH

HEATER

BLANK

PROVIDE ACCESS TO PUMP FOR SERVICE ON ALL

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

(813mm) 16 (406mm)

C/L OF

SUPPLIES

	CUTOUT IN FLOOR FOR DRAIN
3	(8) JETS
(76mm)	(2) AIR VALVES

INSTALLATIONS

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

C/L OF DRAIN

C/L OF

SHOWER ARM

FINISHED

OPTIONAL TO

WALL

FINISHED FLOOR

■ LEVELING

C/L OF

USUALLY BETWEEN

STRINGER

65 & 78

VALVES

NOT FOR

(1651 & 1981mm)

SUPPORT

C/L OF

C/L OF

12

OVERFLOW

(305mm) OPT.

SPOUT

3-1/2

4

2

(89mm)

(102mm)

(51mm)

UNDERSIDE

OF DECK

21-1/2

19-1/2

(546mm)

(495mm)

ROUGH

IN-LINE HEATER

REMOVABLE

FLOOR

BLANK

INTEGRAL

1-1/2 N.P.T.M.

THREADS

2-3/4

FEET

(70mm)

1-1/2 O.D.TAILPIECE

4-5/8

(117mm)

GENERAL SPECIFICATIONS FOR 2425E WHIRLPOOL

INSTALLED SIZE

60 x 32 x 21-1/2 (1524 x 813 x 546mm)

WEIGHT

115 Lbs. (52 Kg.)

WEIGHT w/WATER

574 Lbs. (258 Kg.)

GAL. TO OVERFLOW

55 Gal. (208 L.)

WHIRLPOOL MIN. OPERATING VOL.

45 Gal. (171 L.)

BATHING WELL AT SUMP

16-1/4 x 38-1/4 (413 x 972mm)

BATHING WELL AT RIM

26-1/4 x 52-1/2 (667 x 1334mm)

WATER DEPTH TO OVERFLOW

15 (381mm)

FLOOR LOADING

43 Lbs./Sq.Ft. (208 Kgs./Sq.m)

(PROJECTED AREA)

PTS.

20.8

CUBE (FT3)

35.3

WHIRLPOOL ELECTRICAL SPECIFICATIONS

PUMP

1.6 HP, 9.7 AMPS,120V.

GENERAL INSTALLATION INFORMATION

List of Optional Components (not included):

•Flex-Jet Pulse Jet Kit*

•Flex-Jet Soft Jet Kit*

•5 Foot Apron*

•E-Z-Install Heater*

List of Required Components (not included):

•	Drain*	• Bath Filler*
* see your Home Depot Retailer
List of Required Tools and Supplies:
Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	15 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2002

752875-100 Rev. DAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.