Krell Industries 7.1 Remote Control Description, Battery Installation and Removal, Power Keys

Page 22

Remote Control Description

See Figure 3 on page 17

BATTERY INSTALLATION AND REMOVAL

Notes

The Home Theater Standard 7.1 remote control provides on and off, input selection, processing mode selection, speaker volume and bal- ance adjust, and mute functions, as well as access to the system configuration menu.

To send operational instructions directly to the Home Theater Standard 7.1 using an RS-232-based external computer control sys- tem, see RS-232 Port: Sending Commands and Interpreting Data, the developer’s reference for the Home Theater Standard 7.1.

The Home Theater Standard 7.1 remote control uses one CR2025 lithium battery, which is included with the shipment.

To open the battery compartment on the back of the remote control:

1.Place the remote face down on the table.

2.Use your thumbnail or a small jeweler’s or eyeglass screwdriver to move the small tab toward the center of the remote, while using your index fingernail or screwdriver to pull down gently on the slot to the right of the tab. The battery compartment will slide out.

3.Place the battery, plus side up, in the battery tray.

4.Slide battery compartment back into the remote until you hear a click.

The remote control is ready for operation.

Do not use a knife or other sharp objects to open the battery compartment; they will scratch the remote control finish.

Replace batteries when remote control function becomes intermittent.

Remove batteries if the remote control is not to be used for a long period of time. Battery leakage can damage the remote control.

FEATURES

Power Keys

Note

Home Theater Standard 7.1 remote control keys and their functions are described below:

57 Amp Key

Use this key to power on/off a Krell remote control amplifier.

58 Pre Key (Power Pre Key)

Use this key to switch the Home Theater Standard 7.1 between the stand-by mode and the operational mode.

When you power off while zone 2 is selected, only zone 2 turns off. Press the power button or the power pre key a second time to power off the main zone.

18

Krell Home Theater Standard 7.1

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Instructions for Use Owner’s Reference Home Theater Standard Contact InformationContents Tables IllustrationsIntroduction Connections Definition of TermsInput and Output OperationTechnology VideoUnpacking Placement AC Power GuidelinesGetting Started See Activating the On Screen Display OSD, onHome Theater Standard 7.1 Front Panel Features Front Panel DescriptionCD Button and LED VCR Button and LEDTV Button and LED Tuner Button and LEDMode 2 Button and LED Processing Mode Stereo Button and LED Buttons and LEDsMode 1 Button and LED Pro Logic II Button and LEDCenter Button THX ButtonDisplay Surr/Back ButtonDirection or Level Buttons Processor Function Save Button ButtonsRemote, on Recall Button3637 Back Panel Description Digital Audio Outputs Optical Digital Audio InputsCoaxial Digital Audio Inputs Video OutputsIEC Connector Comm Port RS-232 ConnectorPower Connections Back Panel Power Switch IEC power connector, for use with the AC power cordHome Theater Standard 7.1 Remote Control Power Keys Remote Control DescriptionBattery Installation and Removal Pre Key Power Pre KeyOr an additional DVD, LD, CD, or VCR Additional DVD, LD, CD, or VCRAux2 Key VCR KeyPro Logic II Key Processing Mode Keys Stereo Key72 M1 Key Mode 1 Key 73 M2 Key Mode 2 Key Pre Key Preamp Pre KeySurr/Back Key Control Function Keys Bal Key Balance KeyCntr Key Sub KeyConnection Steps Connecting the Home Theater Standard 7.1 to Your SystemConnect Analog Sources Digital Sources ConnectStandard Match Video Formats and Signals Video signals, see Choosing a Standard Video Signal, onMatch Video Formats and Signals PAL Ntsc Choosing a Standard Video Signal Connect Video Sources Video MonitorActivating the On Screen Display OSD Activating the On Screen Display OSD Connecting the Home Theater Standard 7.1 to Your System Amplifiers LoudspeakersOverview System Configuration and Navigation Prev Key Previous Key NavigationConventions To Select and EnterSystem Configuration Accessing the Main MenuConfigure Loudspeakers Screen appearsFar right column Limited speakers and the .1 or LFE signal to the subwooferFrom the limited loudspeakers and the .1 or LFE signal Sends information from the crossover frequency see below toAppears, with the cursor blinking at Left MenuStep Calibrate Volume Auto Noise SequenceManual Noise Sequence Program Material Option On to Step Please readBefore continuing StepBefore assigning Video inputs Tional operation. See and belowAssign Video Input These signals build screen content in two passesScreen appears, with the cursor blinking at DVD Please read before configuring audio and digital inputs For descriptions of operating modes listed in TablePossible Default Digital Signals 4 formats Assign Analog Audio Inputs DigitalAssign Digital Audio Audio Inputs screen appears, with the cursor blinking at DVDZone or zone 2 listening Configure TriggerTrigger Modes Main zone listeningHow To Navigate the Menu Make a Selection Configure Level AdjustmentInput device is selected it has a range of + 15 dB to 15 dB Device TrimScreen Analog input trim Not selected Analog Input Trim Input Trim screen appearsMode SUB Trim screen appears DTS Neo6 Control Control screen appears, with the cursor blinking atPlii Control Maximum Volume Limit Your system, fromZone 2 Level Screen appears, with the cursor blinking at VariableOSD Operation OSD Operation ScreenOSD Operation Audio Operation Ing, and dynamic rangeDB of compression No compressionKrell HTS Bass Peak Limiter Setup Input Setup ConnectedProgram Remote After you press START, the following screen appearsSystem Information Follow these steps to program your learning remoteInformation screen appears Before configuring Room EQ SetupSelection ALL overrides individually configured channels Krell HTS Room EQ Setup Memory Room EQ Setup Recalling SettingsSaving Customized CustomizedTape Input Operating the Home Theater StandardON/OFF/STAND-BY OutputMain Zone Zone 2 OperationPlay Both Zones Play Either ZonePlay in the Main Zone Record SimulcastAppendix Operating Modes for the Home Theater Standard Home Theater Standard 7.1 engages DTS ES Matrix 6.1 decodMatrix mode is useful for monaural recordings Dolby Pro Logic II Modes THX THX Surround EXKrell Music Surround DTS Neo6 ModesModes Warranty Return Authorization Procedure Specifications Distortion THD InputsSpecifications Home Theater Standard

7.1 specifications

Krell Industries has long been a pioneer in high-end audio technology, and their 7.1 home theater receiver is a notable addition to their impressive lineup. This state-of-the-art receiver is engineered to deliver an exceptional audio experience, combining cutting-edge technology with meticulous craftsmanship.

One of the primary features of the Krell Industries 7.1 receiver is its robust amplifier section. Boasting a high current output, it ensures that even the most demanding speakers are driven with pristine clarity and control. Krell's proprietary technology, such as their Class A and Class AB amplification, helps reduce distortion to imperceptible levels, allowing for a more engaging listening experience.

In terms of surround sound capabilities, the Krell 7.1 supports advanced audio formats including Dolby Atmos and DTS:X, providing an immersive sound field that surrounds the listener. This is complemented by Krell's unique DSP technology, which optimizes audio playback based on room acoustics, ensuring that every sound is precisely rendered regardless of the environment.

The user interface of the Krell 7.1 is designed for simplicity and ease of use. With intuitive controls and a clear display, navigating through various settings and features becomes a seamless process. The receiver also features multiple HDMI inputs and outputs, enabling connection with a range of devices such as Blu-ray players, gaming consoles, and streaming services, all supporting 4K video resolution.

Another standout characteristic is the Krell Media Remote app, which allows users to control their home theater experience from their mobile devices. This modern approach to functionality combines convenience with advanced configuration settings.

For audiophiles, the Krell Industries 7.1 is equipped with high-quality digital-to-analog converters (DACs), ensuring that music playback remains true to the original recording. Additionally, its compatibility with high-resolution audio formats makes it a suitable choice for those who appreciate finer details in their music.

Durability and aesthetics are also hallmarks of Krell designs. The 7.1 receiver features an elegant chassis combined with precision-engineered components that not only provide superior performance but also a look that complements any high-end home theater setup.

In summary, the Krell Industries 7.1 receiver stands out for its powerful amplification, immersive surround sound capabilities, intuitive user interface, and high-resolution audio support. Its blend of advanced technologies and sophisticated design makes it an impressive option for anyone seeking to elevate their audio experience.
Top Page Image Contents