Krell Industries 7.1 Far right column, Limited speakers and the .1 or LFE signal to the subwoofer

Page 40

System Configuration, continued

Speaker Setup Screen,

Using this screen, you can enable loudspeakers that are in your sys-

continued

tem in the left column and select loudspeaker characteristics in the

 

far right column.

 

FULL RANGE

 

FULL RANGE sends 20Hz to 20KHz signals to the loudspeaker. LIMITED

 

sends information from the crossover frequency (see below) to

 

20KHz to the loudspeaker. The frequencies below the crossover fre-

 

quency are sent to the subwoofer if present; otherwise, these low fre-

 

quencies are sent to the full range loudspeakers in the system.

 

SUB

 

Select NORMAL or ENHANCED to choose the amount of bass information

 

sent to the subwoofer. NORMAL sends the low frequencies from the

 

limited speakers and the .1 (or LFE) signal to the subwoofer.

 

ENHANCED sends additional bass information from the left and right

 

loudspeakers to the subwoofer in addition to the low frequencies

 

from the limited loudspeakers and the .1 (or LFE) signal.

 

CRSOVR

 

Crossover selections are 120, 100, 80, 60, and 40 Hz. The standard

 

crossover setting is 80 Hz. Choose the crossover frequency appropri-

 

ate for your loudspeakers. The frequencies below the crossover

 

frequency are sent to the subwoofer if a subwoofer is present; other-

 

wise, these low frequencies are sent to the full range loudspeakers in

 

the system.

 

5.1 SURR

 

Select SURROUND, BACK, or BOTH to choose which loudspeakers in a

 

6.1 or 7.1 system receive surround information when playing a Dolby

 

Digital 5.1 or DTS 5.1 encoded software. SURROUND sends surround

 

channel information to your surround loudspeakers only. BACK sends

 

surround channel information to your back loudspeakers only. BOTH

 

sends surround channel information to your surround and back loud-

 

speakers simultaneously.

 

After selecting the appropriate loudspeaker setups for your system,

 

press the previous key twice to return to the main menu.

How To Navigate the Menu

and Make a Selection

1.Use the direction keys to scroll from line to line.

2.Press enter to select a line.

3.Use the direction keys to scroll through options within a line.

4.Press enter to select and set an option.

5.Use the direction keys to scroll to the next line.

36

Krell Home Theater Standard 7.1

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Instructions for Use Owner’s Reference Home Theater Standard Contact InformationContents Tables IllustrationsIntroduction Definition of Terms Input and OutputConnections OperationTechnology VideoUnpacking Placement AC Power GuidelinesGetting Started See Activating the On Screen Display OSD, onHome Theater Standard 7.1 Front Panel Features Front Panel DescriptionVCR Button and LED TV Button and LEDCD Button and LED Tuner Button and LEDProcessing Mode Stereo Button and LED Buttons and LEDs Mode 1 Button and LEDMode 2 Button and LED Pro Logic II Button and LEDTHX Button DisplayCenter Button Surr/Back ButtonProcessor Function Save Button Buttons Remote, onDirection or Level Buttons Recall Button3637 Back Panel Description Optical Digital Audio Inputs Coaxial Digital Audio InputsDigital Audio Outputs Video OutputsComm Port RS-232 Connector Power Connections Back Panel Power SwitchIEC Connector IEC power connector, for use with the AC power cordHome Theater Standard 7.1 Remote Control Remote Control Description Battery Installation and RemovalPower Keys Pre Key Power Pre KeyAdditional DVD, LD, CD, or VCR Aux2 KeyOr an additional DVD, LD, CD, or VCR VCR KeyProcessing Mode Keys Stereo Key 72 M1 Key Mode 1 Key 73 M2 Key Mode 2 KeyPro Logic II Key Pre Key Preamp Pre KeyControl Function Keys Bal Key Balance Key Cntr KeySurr/Back Key Sub KeyConnection Steps Connecting the Home Theater Standard 7.1 to Your SystemConnect Analog Sources Digital Sources ConnectStandard Match Video Formats and Signals Video signals, see Choosing a Standard Video Signal, onMatch Video Formats and Signals PAL Ntsc Choosing a Standard Video Signal Connect Video Sources Video MonitorActivating the On Screen Display OSD Activating the On Screen Display OSD Connecting the Home Theater Standard 7.1 to Your System Amplifiers LoudspeakersOverview System Configuration and Navigation Navigation ConventionsPrev Key Previous Key To Select and EnterSystem Configuration Accessing the Main MenuConfigure Loudspeakers Screen appearsLimited speakers and the .1 or LFE signal to the subwoofer From the limited loudspeakers and the .1 or LFE signalFar right column Sends information from the crossover frequency see below toAppears, with the cursor blinking at Left MenuStep Calibrate Volume Auto Noise SequenceManual Noise Sequence Program Material Option Please read Before continuingOn to Step StepBefore assigning Video inputs Tional operation. See and belowAssign Video Input These signals build screen content in two passesScreen appears, with the cursor blinking at DVD Please read before configuring audio and digital inputs For descriptions of operating modes listed in TablePossible Default Digital Signals 4 formats Assign Analog Audio Inputs DigitalAssign Digital Audio Audio Inputs screen appears, with the cursor blinking at DVDConfigure Trigger Trigger ModesZone or zone 2 listening Main zone listeningHow To Navigate the Menu Make a Selection Configure Level AdjustmentInput device is selected it has a range of + 15 dB to 15 dB Device TrimScreen Analog input trim Not selected Analog Input Trim Input Trim screen appearsMode SUB Trim screen appears DTS Neo6 Control Control screen appears, with the cursor blinking atPlii Control Maximum Volume Limit Your system, fromZone 2 Level Screen appears, with the cursor blinking at VariableOSD Operation OSD Operation ScreenOSD Operation Audio Operation Ing, and dynamic rangeDB of compression No compressionKrell HTS Bass Peak Limiter Setup Input Setup ConnectedProgram Remote After you press START, the following screen appearsSystem Information Follow these steps to program your learning remoteInformation screen appears Before configuring Room EQ SetupSelection ALL overrides individually configured channels Krell HTS Room EQ Setup Memory Room EQ Setup Settings Saving CustomizedRecalling CustomizedOperating the Home Theater Standard ON/OFF/STAND-BYTape Input OutputMain Zone Zone 2 OperationPlay Both Zones Play Either ZonePlay in the Main Zone Record SimulcastAppendix Operating Modes for the Home Theater Standard Home Theater Standard 7.1 engages DTS ES Matrix 6.1 decodMatrix mode is useful for monaural recordings Dolby Pro Logic II Modes THX THX Surround EXKrell Music Surround DTS Neo6 ModesModes Warranty Return Authorization Procedure Specifications Distortion THD InputsSpecifications Home Theater Standard

7.1 specifications

Krell Industries has long been a pioneer in high-end audio technology, and their 7.1 home theater receiver is a notable addition to their impressive lineup. This state-of-the-art receiver is engineered to deliver an exceptional audio experience, combining cutting-edge technology with meticulous craftsmanship.

One of the primary features of the Krell Industries 7.1 receiver is its robust amplifier section. Boasting a high current output, it ensures that even the most demanding speakers are driven with pristine clarity and control. Krell's proprietary technology, such as their Class A and Class AB amplification, helps reduce distortion to imperceptible levels, allowing for a more engaging listening experience.

In terms of surround sound capabilities, the Krell 7.1 supports advanced audio formats including Dolby Atmos and DTS:X, providing an immersive sound field that surrounds the listener. This is complemented by Krell's unique DSP technology, which optimizes audio playback based on room acoustics, ensuring that every sound is precisely rendered regardless of the environment.

The user interface of the Krell 7.1 is designed for simplicity and ease of use. With intuitive controls and a clear display, navigating through various settings and features becomes a seamless process. The receiver also features multiple HDMI inputs and outputs, enabling connection with a range of devices such as Blu-ray players, gaming consoles, and streaming services, all supporting 4K video resolution.

Another standout characteristic is the Krell Media Remote app, which allows users to control their home theater experience from their mobile devices. This modern approach to functionality combines convenience with advanced configuration settings.

For audiophiles, the Krell Industries 7.1 is equipped with high-quality digital-to-analog converters (DACs), ensuring that music playback remains true to the original recording. Additionally, its compatibility with high-resolution audio formats makes it a suitable choice for those who appreciate finer details in their music.

Durability and aesthetics are also hallmarks of Krell designs. The 7.1 receiver features an elegant chassis combined with precision-engineered components that not only provide superior performance but also a look that complements any high-end home theater setup.

In summary, the Krell Industries 7.1 receiver stands out for its powerful amplification, immersive surround sound capabilities, intuitive user interface, and high-resolution audio support. Its blend of advanced technologies and sophisticated design makes it an impressive option for anyone seeking to elevate their audio experience.
Top Page Image Contents