Krell Industries 7.1 manual Connect, Digital Sources, Standard

Page 27

Connecting the Home Theater Standard 7.1 to Your System, continued

Step 3: Connect

The Home Theater Standard 7.1 is equipped with six coaxial digital

Digital Sources

audio inputs (44) via RCA connectors and two digital EIAJ optical

 

inputs (43) via TosLink connectors. Connect the digital audio output

 

of your source components to the digital inputs on the Home Theater

 

Standard 7.1.

 

For sources that are equipped with both digital and analog outputs, the digi-

Note

 

tal outputs should be connected for listening in the main zone; the analog

 

outputs should be connected for listening in zone 2 and for recording from

 

the main zone or zone 2.

Please read before continuing on to Step 4

1.The Home Theater Standard 7.1 will only operate correctly:

•When the video source signal (component, s-video, or compos- ite) to the Home Theater Standard 7.1 and the video signal from the Home Theater Standard 7.1 to the video monitor match, and

•When the video device is configured for that same signal (com- ponent, s-video, or composite) in the Home Theater Standard 7.1 configuration menu.

2.If you select the video signal that is the factory default for the video device (for example: a component signal for the DVD), you do not need to configure the video signal in the Home Theater Standard 7.1 configuration menu. See Figure 4, for North American operation, on page 25, and Figure 5, for overseas operation, on page 26.

3.If you are not using the default video signal, you must use the configuration menu in the Home Theater Standard 7.1 and change the video signal for the video device.

4.You need the remote control and the on screen display (OSD) to access the configuration menu.

5.In order for the OSD to be visible:

•Set your monitor to NTSC Interlaced for North American operation,

or

•Set your monitor to PAL Interlaced or NTSC Interlaced for overseas operation.

When your monitor is set to NTSC Progressive or PAL Progressive, the OSD will not be visible.

6.The video device LED must be illuminated on the front panel of the Home Theater Standard 7.1 in order for the OSD to be visible.

Krell Home Theater Standard 7.1

23

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Instructions for Use Owner’s Reference Contact Information Home Theater StandardContents Illustrations TablesIntroduction Operation Definition of TermsInput and Output ConnectionsVideo TechnologyUnpacking AC Power Guidelines PlacementSee Activating the On Screen Display OSD, on Getting StartedHome Theater Standard 7.1 Front Panel Front Panel Description FeaturesTuner Button and LED VCR Button and LEDTV Button and LED CD Button and LEDPro Logic II Button and LED Processing Mode Stereo Button and LED Buttons and LEDsMode 1 Button and LED Mode 2 Button and LEDSurr/Back Button THX ButtonDisplay Center ButtonRecall Button Processor Function Save Button ButtonsRemote, on Direction or Level Buttons3637 Back Panel Description Video Outputs Optical Digital Audio InputsCoaxial Digital Audio Inputs Digital Audio OutputsIEC power connector, for use with the AC power cord Comm Port RS-232 ConnectorPower Connections Back Panel Power Switch IEC ConnectorHome Theater Standard 7.1 Remote Control Pre Key Power Pre Key Remote Control DescriptionBattery Installation and Removal Power KeysVCR Key Additional DVD, LD, CD, or VCRAux2 Key Or an additional DVD, LD, CD, or VCRPre Key Preamp Pre Key Processing Mode Keys Stereo Key72 M1 Key Mode 1 Key 73 M2 Key Mode 2 Key Pro Logic II KeySub Key Control Function Keys Bal Key Balance KeyCntr Key Surr/Back KeyConnecting the Home Theater Standard 7.1 to Your System Connection StepsConnect Analog Sources Connect Digital SourcesStandard Video signals, see Choosing a Standard Video Signal, on Match Video Formats and SignalsMatch Video Formats and Signals PAL Ntsc Connect Video Sources Video Monitor Choosing a Standard Video SignalActivating the On Screen Display OSD Activating the On Screen Display OSD Connecting the Home Theater Standard 7.1 to Your System Loudspeakers AmplifiersOverview System Configuration and Navigation To Select and Enter NavigationConventions Prev Key Previous KeyAccessing the Main Menu System ConfigurationScreen appears Configure LoudspeakersSends information from the crossover frequency see below to Limited speakers and the .1 or LFE signal to the subwooferFrom the limited loudspeakers and the .1 or LFE signal Far right columnMenu Appears, with the cursor blinking at LeftAuto Noise Sequence Step Calibrate VolumeManual Noise Sequence Program Material Option Step Please readBefore continuing On to StepVideo inputs Tional operation. See and below Before assigningThese signals build screen content in two passes Assign Video InputScreen appears, with the cursor blinking at DVD For descriptions of operating modes listed in Table Please read before configuring audio and digital inputsPossible Default Digital Signals 4 formats Digital Assign Analog Audio InputsAudio Inputs screen appears, with the cursor blinking at DVD Assign Digital AudioMain zone listening Configure TriggerTrigger Modes Zone or zone 2 listeningHow To Navigate the Menu Make a Selection Adjustment Configure LevelDevice Trim Input device is selected it has a range of + 15 dB to 15 dBScreen Analog input trim Not selected Input Trim screen appears Analog Input TrimMode SUB Trim screen appears Control screen appears, with the cursor blinking at DTS Neo6 ControlPlii Control Your system, from Maximum Volume LimitScreen appears, with the cursor blinking at Variable Zone 2 LevelOSD Operation Screen OSD OperationOSD Operation Ing, and dynamic range Audio OperationNo compression DB of compressionKrell HTS Bass Peak Limiter Setup Connected Input SetupAfter you press START, the following screen appears Program RemoteFollow these steps to program your learning remote System InformationInformation screen appears Room EQ Setup Before configuringSelection ALL overrides individually configured channels Krell HTS Room EQ Setup Memory Room EQ Setup Customized SettingsSaving Customized RecallingOutput Operating the Home Theater StandardON/OFF/STAND-BY Tape InputZone 2 Operation Main ZonePlay Either Zone Play Both ZonesSimulcast Play in the Main Zone RecordHome Theater Standard 7.1 engages DTS ES Matrix 6.1 decod Appendix Operating Modes for the Home Theater StandardDolby Pro Logic II Modes THX THX Surround EX Matrix mode is useful for monaural recordingsDTS Neo6 Modes Krell Music SurroundModes Warranty Return Authorization Procedure Distortion THD Inputs SpecificationsSpecifications Home Theater Standard

7.1 specifications

Krell Industries has long been a pioneer in high-end audio technology, and their 7.1 home theater receiver is a notable addition to their impressive lineup. This state-of-the-art receiver is engineered to deliver an exceptional audio experience, combining cutting-edge technology with meticulous craftsmanship.

One of the primary features of the Krell Industries 7.1 receiver is its robust amplifier section. Boasting a high current output, it ensures that even the most demanding speakers are driven with pristine clarity and control. Krell's proprietary technology, such as their Class A and Class AB amplification, helps reduce distortion to imperceptible levels, allowing for a more engaging listening experience.

In terms of surround sound capabilities, the Krell 7.1 supports advanced audio formats including Dolby Atmos and DTS:X, providing an immersive sound field that surrounds the listener. This is complemented by Krell's unique DSP technology, which optimizes audio playback based on room acoustics, ensuring that every sound is precisely rendered regardless of the environment.

The user interface of the Krell 7.1 is designed for simplicity and ease of use. With intuitive controls and a clear display, navigating through various settings and features becomes a seamless process. The receiver also features multiple HDMI inputs and outputs, enabling connection with a range of devices such as Blu-ray players, gaming consoles, and streaming services, all supporting 4K video resolution.

Another standout characteristic is the Krell Media Remote app, which allows users to control their home theater experience from their mobile devices. This modern approach to functionality combines convenience with advanced configuration settings.

For audiophiles, the Krell Industries 7.1 is equipped with high-quality digital-to-analog converters (DACs), ensuring that music playback remains true to the original recording. Additionally, its compatibility with high-resolution audio formats makes it a suitable choice for those who appreciate finer details in their music.

Durability and aesthetics are also hallmarks of Krell designs. The 7.1 receiver features an elegant chassis combined with precision-engineered components that not only provide superior performance but also a look that complements any high-end home theater setup.

In summary, the Krell Industries 7.1 receiver stands out for its powerful amplification, immersive surround sound capabilities, intuitive user interface, and high-resolution audio support. Its blend of advanced technologies and sophisticated design makes it an impressive option for anyone seeking to elevate their audio experience.
Top Page Image Contents