American Standard 2083.202, 2083.102 dimensions General Specifications for 2083 Bathing Pool

Standard Collection®

BATHING POOL

HIGH GLOSS

										60"
						7-3/4"			(1524mm)
		3/4"					(197mm)	FINISHED			70mm
			(19mm)					WALL			(2-3/4)
				4"
		15-3/8"
	(391mm)			(102mm)					229mm x 305mm
									(9 x 12)
									FLOOR
		4"
			(102mm)						CUTOUT
32"
(813mm)
		2-3/8"		+13mm
		(2-3/8)		+(1/2)
			C/L OF 1/2		25mm			4-1/2"
					(1) C/L OF					(114mm)
			SUPPLIES
							DRAIN
			AS REQ'D

SHOWER ARM- 1/2 N.P.T.

1-1/4"(32mm) DIA. HOLE

C/L OF CURTAIN ROD USUALLY 76"(1930mm) FROM FINISHED FLOOR

					FINISHED
	C/L OF	(2) 2-1/8"(54mm)		4"	WALL
	VALVES			(102mm)
		DIA. HOLES
OPTIONAL		4"	4"	SPOUT-
TO FLOOR
	16"	(102mm)	(102mm)	1/2 N.P.T.
USUALLY
BETWEEN	(406mm16)			3-1/2"
65 & 78				(89mm)
(1651 & 1981mm)		1"
	(25mm)				SEE	19-3/4"
	20"
					NOTE
						(502mm)
	(508mm)
TOP OF DECK
					2"
					(51mm)
						ROUGH
		4-5/8"				FLOOR
				1-1/2 N.P.T. THREADS
		(117mm)
				1-1/2 O.D. TAILPIECE

BATH SUPPORT MATERIAL

GENERAL SPECIFICATIONS FOR 2083 BATHING POOL

INSTALLED SIZE			60 x 32 x 20 In.
		(1524 x 813 x 508mm)
WEIGHT				100 Lbs. (45 Kg.)
WEIGHT w/WATER			551 Lbs. (250 Kg.)
GAL. TO OVERFLOW				54 Gal. (204 L)
BATHING WELL AT SUMP		18 x 42 In. (457 x 1067mm)
BATHING WELL AT RIM		25 X 54 In. (635 x 1372mm)
WATER DEPTH TO OVERFLOW				14 In. (356mm)
FLOOR LOADING	41 Lbs./Sq.Ft. (202 Kgs./Sq.m)
(PROJECTED AREA)
PTS.						20.8
CUBE (FT3)					35.3

NOTES:

BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2083.202).

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

H102

© 2008 AS America Inc. Revised 12/99