American Standard 6035 For TILE, Corian or MARBLE/GRANITE Wall Installations

Page 2

3 INSTALL DIVERTER WITH SHOWER HEAD

Ensure ESCUTCHEON (1) is assembled onto DIVERTER (2). Hold DIVERTER BODY (2) and thread the DIVERTER (2) with SHOWER HEAD (3) onto NIPPLE (4) until snug against the finished wall and in position as shown.

2

3

4

1

(NOTE: If customer desires to use alternate shower head, then pull back Escutcheon (1) on SHOWER HEAD (2) and turn counter-clockwise with an adjustable wrench. Replace with customer shower head, arm and flange.)

1

2

 

SHOWER HEAD

Adjustable Wrench

REMOVED

 

4 INSTALL the ￿￿￿￿￿￿￿￿™ UNIT

Remove END CAPS (1) from the two ends by sliding forward over the detents as arrows show in illustration. Locate the unit vertically on the shower wall in the desired position. (Do not mount the unit closer than 6-1/4" (160mm) or further than 11-3/4" (300mm) from the DIVERTER.

4a

FOR TILE, CORIAN® OR MARBLE/GRANITE WALL INSTALLATIONS

Note: For granite (Marble) wall Installations use of a hammer drill is suggested.

Figure 1. Hold Vertispa unit in desired location. Refer to roughing-in dimensions.

Mark location of the upper mounting hole. Using a 3/16" carbide drill bit (provided), drill the mounting hole into the shower wall and

install hardware, (See Figure 2). (Caution: Take care when drilling between the Diverter and the valves as water pipes maybe located here). Mount the unit with screw provided and set the unit vertical using a level. Now mark the lower mounting hole. Remove or swing aside the unit, drill lower mounting hole and install hardware into mounting hole.

Use mounting screw provided to secure lower section of unit. Slide END CAPS (1) back into position.

1

4b FOR THIN WALL INSTALLATIONS

Figure 3. Use 5/16" standard drill bit (not provided) and drill two mounting holes as detailed above. (Caution: Take care when drilling between the Diverter and the Valves as water pipes may be located here.)

Insert two TOGGLE ANCHORS (1) and secure unit using the two screws provided.

Figure 1

1

1-1/4" DEEP

3/16" CARBIDE DRILL

DRILL

MOUNTING

HOLE

PUSH RIBBED

ANCHORS IN

MOUNTING

HOLE

MOUNT UNIT

WITH SCREWS

PROVIDED

Figure 2

5/16"

1

SQUEEZE ENDS

TOGETHER AND

INSTALL INTO

MOUNTING HOLES.

MOUNT UNIT

WITH SCREWS

PROVIDED

Figure 3

M 9 6 8 4 1 6 R E V 1 . 1

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Designer Shower 6035 Massage System Remove Existing Install Pipe Nipple Shower HeadROUGHING-IN Dimensions For TILE, Corian or MARBLE/GRANITE Wall Installations 4b for Thin Wall InstallationsConnect Flexible Hose to Diverter OperationModel Number Designer Shower Massage SystemShower Head Mounting KIT

6035 specifications

The American Standard 6035 is a high-performance bathroom fixture designed for modern comfort and efficiency. This innovative model offers a combination of cutting-edge technologies and thoughtful design, making it a top choice for homeowners seeking both functionality and style in their bathroom.

One of the standout features of the American Standard 6035 is its water-saving technology. With a focus on sustainability, this model is designed to reduce water consumption without compromising performance. It utilizes a low-flow system that maintains a satisfying pressure while using significantly less water than traditional fixtures. This helps homeowners save on their water bills and reduces their environmental footprint.

Moreover, the American Standard 6035 incorporates an easy-to-clean design, featuring smooth lines and a sleek surface that minimizes crevices where dirt and grime can accumulate. This makes maintaining the fixture a hassle-free experience, allowing users to spend more time enjoying their bathroom rather than cleaning it. The finishing touches include a durable finish that resists scratching and tarnishing, ensuring that the fixture retains its aesthetic appeal over time.

In terms of technology, the American Standard 6035 is equipped with advanced flushing capabilities. The dual flush system allows users to choose between a full flush for solid waste and a lighter flush for liquids, further enhancing water conservation. This flexibility is not only eco-friendly but also tailored to meet individual needs.

The ergonomic design of the American Standard 6035 ensures comfort for all users. The height and shape have been carefully considered to accommodate a variety of body types, making it an inclusive choice suitable for families. Additionally, the model is crafted from high-quality materials, ensuring durability and long-lasting performance that can withstand the rigors of daily use.

Lastly, American Standard is known for its commitment to innovation, and the 6035 embodies this ethos. With a wide range of models and styles, consumers can easily find a fixture that complements their bathroom decor. The American Standard 6035 is more than just a bathroom fixture; it is a testament to the brand’s dedication to quality, sustainability, and customer satisfaction. By choosing this model, homeowners invest in a product that enhances their daily routines while contributing positively to the environment.
Top Page Image Contents