Installing the appliance
Attaching and aligning the custom door front
^Fit the door handle to the custom door.
Note that the screws are applied from the reverse side.
^Adjust the custom door to adjacent furniture/fixtures.
^Align the custom door with the
^Tighten the nuts on the adjusting rail. This will correct the side alignment of the door.
^Open the door and hang the custom door with the adjusting rail over the
^Screw the nuts q a few turns onto the
^Close the door.
^Put the side strips o back into place and screw them completely down on both sides of the appliance door.
Bag E contains spare screws for this purpose.
^Align the custom door again as needed and tighten all screws on the sides.
63
