Manuals / Hunter Fan / Kitchen Appliance / Ventilation Hood

Hunter Fan 43042-01 manual I n s t a l l a t i o n, G u i d e, READ and SAVE THESE INSTRUCTIONS

Models: 43042-01 82048

1 21

Download 21 pages 35.99 Kb

Page 1

Image 1

I n s t a l l a t i o n

G u i d e

82048 Turino Bath Ventilator with Light

READ and SAVE THESE INSTRUCTIONS

H IS GLNE l EspañoFrançais eeSpage 2Vea la página 23 Consulter la page 45

43042-01 02/21/2008

Page 1

Image 1

Hunter Fan 82048 manual I n s t a l l a t i o n, G u i d e, READ and SAVE THESE INSTRUCTIONS, 43042-01 02/21/2008

Contents

G u i d e I n s t a l l a t i o nREAD and SAVE THESE INSTRUCTIONS 82048 Turino Bath Ventilator with LightMAINTENANCE PREVENTATIVE MAINTENANCEDISCONNECT ELECTRIC POWER SUPPLY AND LOCK OUT SERVICE PANEL BEFORE Do Not Install Abovefor replacements x4 ACheck all the parts If damaged, callTurn off the power source Before InstallationRemove the motor/blower from the housing with the side of the housingChoose Installation Option 43042-01 02/21/2008 New Construction - attaching to joistENGLISH 43042-01 02/21/2008 on page to attach grille Go to stepNew Construction - suspended between joists Mark position of screws by using holes as a template43042-01 02/21/2008 Connect wires as shownAttach the rails onto the screws H IS GLNE43042-01 02/21/2008 Turn on the power sourceENGLISH Secure the motor by tightening the 2 screwsC11 EXISTING FAN Existing Construction - accessible from aboveNO EXISTING FAN Cut out an opening for the housing1/8 Bit Mark position of screws by using holes as a template43042-01 02/21/2008 Position the correct depth mark at the bottom edge of the joistGLNE 43042-01 02/21/200843042-01 02/21/2008 ON OFFENGLISH D11 EXISTING FAN Existing Construction - accessible only from belowPull wires through strain relief Attach existing ducting to duct connector. Tape jointsENGLISH 43042-01 02/21/2008Go to step Turn on the power sourceon page to attach grille ON OFFENGLISH 43042-01 02/21/200843042-01 02/21/2008 Install 2 Max 60 Watt A15 bulbs Not IncludedAttach thumbscrews Screw glass stop into position43042-01 02/21/2008 Trouble Shooting43042-01 02/21/2008 Warranty