Manuals / Hunter Fan / Kitchen Appliance / Ventilation Hood

Hunter Fan 82048 manual New Construction - attaching to joist, 43042-01 02/21/2008, English

Models: 43042-01 82048

1 21

Download 21 pages 35.99 Kb

Page 6

Image 6

New Construction – attaching to joist

A11

5/8

1/2

Position the correct depth mark at the bottom edge of the joist

based on the thickness of your sheetrock.

A13

ENGLISH

Pull wires through the strain relief.

A12

Screw pre-loaded screws into joist or framing.

A14			Ground
	2 Pin	Black	Green
	2 Pin		A	Bare Copper
		White		Bare Copper
		White
Fan Motor			Black Main Switch 1 (AC In)
F		White		White
Light	3 Pin	Black Light
Light		Black Light
		*Option
*Option Fan & Main Light Together			Black	Switch 2 (AC In)
*Option Fan & Main Light Together

Connect wires as shown.

43042-01 02/21/2008

Page 6

Image 6

Hunter Fan 82048 manual New Construction - attaching to joist, 43042-01 02/21/2008, English

Contents

READ and SAVE THESE INSTRUCTIONS I n s t a l l a t i o nG u i d e 82048 Turino Bath Ventilator with LightDISCONNECT ELECTRIC POWER SUPPLY AND LOCK OUT SERVICE PANEL BEFORE PREVENTATIVE MAINTENANCEMAINTENANCE Do Not Install AboveCheck all the parts x4 Afor replacements If damaged, callRemove the motor/blower from the housing Before InstallationTurn off the power source with the side of the housingChoose Installation Option New Construction - attaching to joist 43042-01 02/21/2008ENGLISH 43042-01 02/21/2008 New Construction - suspended between joists Go to stepon page to attach grille Mark position of screws by using holes as a templateAttach the rails onto the screws Connect wires as shown43042-01 02/21/2008 H IS GLNEENGLISH Turn on the power source43042-01 02/21/2008 Secure the motor by tightening the 2 screwsNO EXISTING FAN Existing Construction - accessible from aboveC11 EXISTING FAN Cut out an opening for the housing43042-01 02/21/2008 Mark position of screws by using holes as a template1/8 Bit Position the correct depth mark at the bottom edge of the joist43042-01 02/21/2008 GLNEON OFF 43042-01 02/21/2008ENGLISH Pull wires through strain relief Existing Construction - accessible only from belowD11 EXISTING FAN Attach existing ducting to duct connector. Tape joints43042-01 02/21/2008 ENGLISHon page to attach grille Turn on the power sourceGo to step ON OFF43042-01 02/21/2008 ENGLISHAttach thumbscrews Install 2 Max 60 Watt A15 bulbs Not Included43042-01 02/21/2008 Screw glass stop into positionTrouble Shooting 43042-01 02/21/2008Warranty 43042-01 02/21/2008