Manuals / Hunter Fan / Kitchen Appliance / Ventilation Hood

Hunter Fan 82048 Go to step, on page to attach grille, On Off, 43042-01 02/21/2008, H Is Glne

Models: 43042-01 82048

1 21

Page 17

Test the motor. If the motor does not run, check the plug con-

D19

Reinstall the motor by inserting the tabs and pushing up into position. Make sure the wires are not pinched between the mo- tor and the housing.

D21

Turn on the power source.

D20

Manual background I

Secure the motor by tightening the 2 screws.

D22

OFF

Test the motor. If the motor does not run, check the plug con-

nection.

H IS GLNE

D23

Go to step

on page 18

to attach grille.

43042-01 02/21/2008

Page 17

Image 17

Hunter Fan manual Go to step, on page to attach grille, On Off, 43042-01 02/21/2008, Turn on the power source, H Is Glne

Contents

G u i d e I n s t a l l a t i o nREAD and SAVE THESE INSTRUCTIONS 82048 Turino Bath Ventilator with LightMAINTENANCE PREVENTATIVE MAINTENANCEDISCONNECT ELECTRIC POWER SUPPLY AND LOCK OUT SERVICE PANEL BEFORE Do Not Install Abovefor replacements x4 ACheck all the parts If damaged, callTurn off the power source Before InstallationRemove the motor/blower from the housing with the side of the housingChoose Installation Option ENGLISH New Construction - attaching to joist43042-01 02/21/2008 43042-01 02/21/2008 on page to attach grille Go to stepNew Construction - suspended between joists Mark position of screws by using holes as a template43042-01 02/21/2008 Connect wires as shownAttach the rails onto the screws H IS GLNE43042-01 02/21/2008 Turn on the power sourceENGLISH Secure the motor by tightening the 2 screwsC11 EXISTING FAN Existing Construction - accessible from aboveNO EXISTING FAN Cut out an opening for the housing1/8 Bit Mark position of screws by using holes as a template43042-01 02/21/2008 Position the correct depth mark at the bottom edge of the joistGLNE 43042-01 02/21/2008ENGLISH ON OFF43042-01 02/21/2008 D11 EXISTING FAN Existing Construction - accessible only from belowPull wires through strain relief Attach existing ducting to duct connector. Tape jointsENGLISH 43042-01 02/21/2008Go to step Turn on the power sourceon page to attach grille ON OFFENGLISH 43042-01 02/21/200843042-01 02/21/2008 Install 2 Max 60 Watt A15 bulbs Not IncludedAttach thumbscrews Screw glass stop into position43042-01 02/21/2008 Trouble Shooting43042-01 02/21/2008 Warranty