American Standard 6035 installation instructions Connect Flexible Hose to Diverter, Operation

Page 3

5 CONNECT FLEXIBLE HOSE TO DIVERTER

Thread the HOSE COUPLING (1) onto DIVERTER NIPPLE (2) and hand tighten clockwise. Note: Moulded end of HOSE COUPLING (1) creates watertight seal with with thread of DIVERTER NIPPLE (2), so seal washer is not required.

Make sure HOSE (3) is not kinked or twisted.

2

1

3

6 OPERATION

SPRAY UNIT (1) can be adjusted up and down by sliding unit along the rails. (See Maintenance section for steps to adjust the tension of SPRAY UNIT (1) on the rails.)

Shower function can be diverted by rotating DIVERTER ARM (2) clockwise for flow out of SPRAYS (3) and counter- clockwise for flow out of

SHOWER HEAD (4).

SHOWER HEAD SPRAY (5) can be adjusted by rotating outer ring on the faceplate.

2

5

4

9-3/4"

UP AND DOWN TRAVEL OF UNIT

1 3

7 MAINTENANCE

Figure 3

Removing spray for cleaning or changing spray location

 

Figure 1. Unscrew the TRIM RING (2) on the outside of the SPRAY HEADS (1)

 

by twisting 1/8th of a turn counter-clockwise.

 

Remove the O-RING (4) and NOZZLE (3).

 

Nozzle (3) can be cleaned using soft bristled brush.

7

Replace O-RING (4) and NOZZLE (3) and lock the TRIM (2) into place by

 

twisting it clockwise until it clicks.

 

GROOVE

5

6

TAB

2

4

3

1

5

COUNTER-CLOCKWISE

TO REMOVECLOCKWISE

TO INSTALL

Figure 1

6

Adjusting tension of SPRAY UNIT on vertical rails.

Shower system comes with two FRICTION CLIPS (5) installed.

Move SPRAY UNIT (6) up and down along vertical rails. FRICTION CLIP (5) holds the SPRAY UNIT (6) at desired location.

(Figure 2) If SPRAY UNIT (6) has too much tension on vertical rails, then remove one FRICTION CLIP (5) or reposition the CLIPS (5) closer to the center of the unit. (Note: Tension on vertical rails will reduce when 5 shower system is moistened from shower application.)

(Figure 3) To replace FRICTION CLIP (5), insert

 

groove of FRICTION CLIP (5) onto inside edge of

 

SPRAY UNIT (6). Rotate other end down and press

 

until the FRICTION CLIP (5) snaps into position onto

 

tab of SPRAY BODY (7).

Figure 2

VERTICAL RAILS

8 CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: CLEAN THE PRODUCT WITH

SOAPS, ACID, POLISH, ABRASIVES,

HARSH CLEANERS, OR A CLOTH

WITH A COARSE SURFACE.

HOT LINE FOR HELP

For toll-free information and answers to your questions, call:

1 (800) 442-1902

Weekdays 8:00 a.m. to 7:00 p.m. Eastern Time

IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)

P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c . © A m e r i c a n S t a n d a r d I n c . 2 0 0 4

M 9 6 8 4 1 6 R E V 1 . 1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Remove Existing Install Pipe Nipple Shower Head ROUGHING-IN DimensionsDesigner Shower 6035 Massage System 4b for Thin Wall Installations For TILE, Corian or MARBLE/GRANITE Wall InstallationsOperation Connect Flexible Hose to DiverterMounting KIT Designer Shower Massage SystemShower Head Model Number

6035 specifications

The American Standard 6035 is a high-performance bathroom fixture designed for modern comfort and efficiency. This innovative model offers a combination of cutting-edge technologies and thoughtful design, making it a top choice for homeowners seeking both functionality and style in their bathroom.

One of the standout features of the American Standard 6035 is its water-saving technology. With a focus on sustainability, this model is designed to reduce water consumption without compromising performance. It utilizes a low-flow system that maintains a satisfying pressure while using significantly less water than traditional fixtures. This helps homeowners save on their water bills and reduces their environmental footprint.

Moreover, the American Standard 6035 incorporates an easy-to-clean design, featuring smooth lines and a sleek surface that minimizes crevices where dirt and grime can accumulate. This makes maintaining the fixture a hassle-free experience, allowing users to spend more time enjoying their bathroom rather than cleaning it. The finishing touches include a durable finish that resists scratching and tarnishing, ensuring that the fixture retains its aesthetic appeal over time.

In terms of technology, the American Standard 6035 is equipped with advanced flushing capabilities. The dual flush system allows users to choose between a full flush for solid waste and a lighter flush for liquids, further enhancing water conservation. This flexibility is not only eco-friendly but also tailored to meet individual needs.

The ergonomic design of the American Standard 6035 ensures comfort for all users. The height and shape have been carefully considered to accommodate a variety of body types, making it an inclusive choice suitable for families. Additionally, the model is crafted from high-quality materials, ensuring durability and long-lasting performance that can withstand the rigors of daily use.

Lastly, American Standard is known for its commitment to innovation, and the 6035 embodies this ethos. With a wide range of models and styles, consumers can easily find a fixture that complements their bathroom decor. The American Standard 6035 is more than just a bathroom fixture; it is a testament to the brand’s dedication to quality, sustainability, and customer satisfaction. By choosing this model, homeowners invest in a product that enhances their daily routines while contributing positively to the environment.
Top Page Image Contents