Linn 110, 104, 106 owner manual Installation, Connecting

English Installation

Installation

For full details, see the Advanced Features manual, which can be found on the Linn website at www.linn.co.uk. Alternatively, contact your Linn retailer or the Linn Helpline (Helpline details are listed at the back of this manual).

For best results, we recommend that your KOMPONENT loudspeakers are unpacked, installed and adjusted by an Authorised Linn Retailer.

Positioning

The KOMPONENT loudspeakers can be stand-mounted, wall-mounted or (in the case of the satellite and centre models) shelf mounted.

If you wish to use the KOMPONENT 104 free standing, attach the supplied rubber feet as shown.

Connecting

General

IMPORTANT. Before making any connections, switch off all products in your hi-fi or AV system.

The terminals are hidden under a removable cover. To access the terminals, unclip the cover by carefully pushing its edges inwards. If your connection and cable-routing method allow, the terminal cover can sometimes be refitted after making the connections.

Standard connection (Single-wiring)

See also the KOMPONENT stand / bracket assembly manuals, supplied with the stands / bracket kits – also available on the Linn website at www.linn.co.uk.

5.1 system suggested speaker positioning

Komponent 106

Komponent 120

Connect the negative (-) or black cable to any of the black

KOMPONENT terminals.

Connect the cable marked positive (+) or red to any of the red terminals on the KOMPONENT.

Terminals

The binding-post terminals can be used as sockets for the connection of 4mm banana plugs or can be used as binding posts for the connection of bare wires or spade-terminated cables by loosening the outer section of the binding post (do not attempt to completely remove this outer section), inserting the cable or terminal and re-tightening to clamp it in place.

KOMPONENT 110, 106 & 104

Owner’s Manual

Spade-terminated Cable Bared Wire Connection Banana Plug

3