Alamo 66 manual Safety

Page 17

SAFETY

Reversing the direction of rotation of the cutting head on side opening machines increases the chances of objects being thrown out because of the position of the "gate" in relation to the boom arm.

When clearing brush and small trees, start at the top and then lower the head down through the brush while sweeping from right to left. This avoids clogging the head with mulched material.

NOTE: Keep the cutting head titled away from the operator when it is raised to avoid throwing splinters towards the cab.

WARNING! Engage the cutting head with the tractor engine at idle. If the cutter is engaged at high rpm, severe damage to the coupling could occur.

Always disengage the Grizzly before leaving the machine. Place the Control Valve in the OFF position and disengage the power take-off. Shut off the engine. A preventor or locking device must be installed on the control valve handle to prevent inadvertent or accidental engagement when the operator is out of the cab.

GRIZZLY 66 01/05

Safety Section 1-11

© 2005 Alamo Group Inc.

Image 17
Contents Grizzly To the OWNER/OPERATOR/DEALER Safety Training Makes the Difference Page Table of Contents Page Safety Section Safety ¡LEA EL Instructivo Do not mount the Tractor while the tractor is Following rules Safety SGM-10 Parts Information Wait a minute...Save a lifeWork Area Preparation Safety Safety Safety QTY Description Decal Location Decals Not Shown Safety Safety Safety Federal Laws and Regulations Introduction Section Introduction Safety First Page Assembly Section PRE-INSTALLATION AssemblyHydraulic Schematic Alternate Hydraulic Schematic Assembly Page Operation Section Pre-Startup OperationCheck LubricateStart Up Two Blade Arm, Three Blade Disc & Disc w/ Cutter BitsTwo Blade Arm w/ Blades Three Blade Rotary Disc Disc w/ Cutter BitsNormal Operation Maintenance Section Disassembly MaintenanceGeneral Maintenance Series II Model AssemblyBikon Hub Bikon Torque Values Installation Installation & Removal of Locking AssemblyBlade Bolts Blade Arm & Bolt Torque ValuesMaintenance Removal General InstructionsGrizzly 66 01/05 Maintenance Section Alamo Industrial Required of the Owner To the OWNER/OPERATOR/DEALERGrizzly 66 01/05 02975193C Printed U.S.A