AEG HG654320NM Replacement of the connection cable, Building, Possibilities for insertion

Page 11

Installation 11

Replacement of the connection cable

To replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure that the cable section is applicable to the voltage and the working temperature. The yellow/ green earth wire must be approximately 2 cm longer than the brown (or black) phase wire.

Building In

min. 600 mm

 

min. 450 mm

min. 650 mm

min. 55 mm

 

30 mm

 

480 mm

560 mm

 

 

A

10 mm

11 mm

3 mm

11 mm

A - supplied seal

A

B

A - supplied seal

B - supplied brackets

Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary.

 

30 mm

a

min 20 mm

(max 150 mm)

60 mm

 

b

 

a) Removable panel

Image 11
Contents EN GAS HOB For Perfect Results Accessories and ConsumablesContents Use Safety InformationGeneral safety Child safetyInstallation Disposal of the appliance InstallationGas Connection Important safety requirementsAdjustment of minimum level Injectors replacementThis HOB Must be Earthed Electrical connectionBrown Live Possibilities for insertion Replacement of the connection cableBuilding Control knobs Product DescriptionCooking surface layout Ignition of the burner OperationInformation on acrylamides Helpful Hints and TipsTurning the burner off Energy savingsCare and Cleaning What to do IF… Cleaning of the spark plugPeriodic maintenance Labels supplied with the accessories bag Technical DataEnvironment Concerns Total PowerPackaging material 397201801-B-052011