Tools Required, List of All Enclosed Parts

Tools Required

Phillips Screwdriver

5/8" Open-End or Adjustable Wrench

3/4" Open-End Wrench

List of All Enclosed Parts

QTY Part # DESCRIPTION

11 Main Tubing Assembly

12 Star Lower Half

33 Leg Tubing

34 1/4 - 20 x 1 1/2” Bolt

35 1/4 - 20 Nut

16 Spray Bar

57 .014 Misting Nozzle

18 Compression Nut

19 Ball Valve

110 Upper Boot

Installation Instructions

1.Remove contents from box.

2.Insert Leg Tubing (#3) between upper and Lower Star (#2). Secure together with Phillips Head Bolt (#4) and 1/4-20 Nut (#5). Leave the bolts loose at this time so the other legs can be inserted. Once all leg tubes are secured, and then tighten bolts with Phillips head screwdriver.

3.Insert Stainless Steel Spray Bar (#6) into Ball Valve (#9), Tighten Compression Nut (#8) with 5/8”open end wrench. Use a 3/4” open end wrench on Ball Valve (#9) as back up wrench. Secure Upper Boot (#10) over Ball Valve (# 9).

4.Hook up garden hose and flush for 20 seconds. Shut water off using Ball Valve located on upper pole.

5.Install (5) .014 Misting Nozzles (#7) into threaded hole on Spray Bar (hand tighten only). You are now ready to enjoy your Portable Misting Tower.

6.Twist upper pole counterclockwise to raise or lower for desired height.

Maintenance

•Clean or replace nozzles as needed.

•Keep garden hose screen clean.

CAUTION! Misting system is intended for outdoor use only.

•Use potable water/fresh water only.

•Shut off garden hose when not in use

Optional Accessories

Part # DESCRIPTION

52505 Inline Sediment Filter

52014 .014 Misting Nozzle

26105 Hose Y Valve

Please visit www.aeromist.com for additional parts and accessories.