Basic Reminders About Your AeroGarden (continued)
(Optional) Trellis System
About the Trellis System (not included)
Your AeroGarden 6 Elite+ has the option of connecting a Trellis System to its Lamp Hood. The Trellis System
allows you to easily support heavy,
If you are interested in purchasing an AeroGarden Trellis System, you may do so at www.aerogardensupport.com or from your retailer.
Trellis System installation
If your AeroGarden 6 Elite+ is already assembled, you will need to remove the Lamp Hood from Lamp Arm, and remove Grow Bulbs from the Lamp Hood before starting. It is best to do this when Garden lights are off.
1
2
3
4
5
Unplug AeroGarden 6 Elite+ and carefully remove Lamp Hood from Lamp Arm.
Turn Lamp Hood over and remove Grow Bulbs. (Be sure bulbs are cool before handling.)
Attach Trellis Brackets to Lamp Hood
Hand tighten
Insert Grow Bulbs into Lamp Hood.
Replace Lamp Hood on Lamp Arm and plug in AeroGarden 6 Elite+.
Use Trellis System
1 Clip Trellis Coil on Bracket. | 2 Pull down Trellis Coil. | 3 Wrap Strap around branch that |
|
| needs support and snap closed. |
Lamp Hood |
|
|
Bracket 
Trellis Coil
As a safety precaution, unplug AeroGarden furnishing before performing this task. Be sure Grow Bulbs are cool to the touch before attaching or adjusting Trellis Coil.
4Gently push up on supported branch until it is at desired height.
13