Customizing Your Massage

Your Caldera spa offers numerous ways for you to cus- tomize your massage experience. Experimentation is the best way to find what feels best to you. Try sitting in dif- ferent seats, adjusting the Power Diverters, air controls and jet nozzles and turning each pump on or off.

POWER DIVERTERS

One Power Diverter is standard on your spa, another is option- al equipment. These allow you to direct the flow of water from the pumps to various combinations of jets.

TIP: Turn both pumps on high speed and position the Power Diverters to “Combo”. Then experiment with each of the air controls to see their effect.

HYDRO JETS

Magna Jets - These jets allow you to re-direct the jet stream by changing the position of the nozzle.

MagnaSsage Jets - These jets provide a rotating mas- sage pattern.

FULL FLOW

	TAS
S		E
C			A
E				T

	C
	O
	M	SPLIT FLOW
	B	SPLIT FLOW
	B
	O

S		H	T
S		H
T		E
T		R
E		A
	J YP

FULL FLOW

Position 1 - The full flow is directed to one series of jets.

Position 2 - The flow is shared between two or more series of jets.

Position 3 - The full flow is directed to a second series of jets.

The nozzles in the Magna jets and the MagnaSsage jets are interchangeable. To remove a MagnaSsage rotating nozzle, simply grasp it and pull straight out. To install, align and push straight in. the nozzle will snap into place. To remove or install a standard Magna jet nozzle, rotate the tabs on either side of the nozzle. Additional MagnaSsage rotating nozzles and dual-port nozzles are available from your Caldera dealer.

The functions of these Power Diverters can best be learned by experimentation as follows:

1.Set all air controls to the “MAX” position.

2.Turn on the high speed of both pumps.

3.Note the labels on the Power Diverters and turn the handles and see which groups of jets are affected. (Note that you can adjust the Power Diverters to any position between the two possible extremes to achieve the jet pressure that feels best to you.)

IMPORTANT: Your spa is not designed to provide full power to all jets when the Power Diverters are in the “Combo” position. However, with the Power Diverter in this position, you may increase the power to selected jets by rotating the face of the Magna and MagnaSsage jets to close the ones that are not in use.

AIR CONTROLS

Each jet system has its own air control. These allow you to change the power of the jets by regulating the amount of air that is mixed with the water coming out of the jets.

MAX

AIR

MIN MAX

WATER

Gentle Medium FULL

Both the Magna and MagnaSsage jets allow you to regu- late the force of the massage. Rotate the fascia ring clockwise to reduce the force or counter-clockwise to increase the force. Notice that turing off the flow to some jets increases the flow to the other jets. To avoid damage to your spa’s plumbing and components, do not turn off

more than half of these jets at the same time.

Euro and Euro-Pulse Jets - The small euro jets deliver a direct, precision massage. Many of these jets feature a special insert that creates a soft, pulsating, rotary massage. The roto jet cap assemblies may be removed if you want a more powerful, direct massage in a particular location. To do this, gently pry around the outside edge of the cap assembly with a table knife, screwdriver or similar tool. If you desire, you may install a roto jet cap removed from one jet onto a standard euro jet simply by snapping the assembly into place. You may purchase addi- tional roto jet assemblies from your Caldera dealer.

AIR JETS

The Air jet system consists of a 1 HP Air pump and 10 Air jets. At the beginning of each skim/filter cycle, the Air jets will operate for 30 seconds to clean out the air channel.

Page 7