Caldera Highland Series Diverter Valve Maintenance, Care of the Exterior, Care of the SPA Cover

Page 25

MAINTENANCE

DIVERTER VALVE MAINTENANCE

If your spa’s diverter valves become difficult to turn, it is likely that sand or grit has become lodged inside the valve body. It is very important that this debris is removed as soon as possible to avoid damage to the valve. To accomplish this, follow this procedure:

1.Turn off power to the spa.

2.Remove the diverter valve’s handle by pulling upward while rocking it back and forth.

3.Unscrew the cap ring.

4.Remove the valve body by pulling it upward.

5.Wipe the valve body and the interior walls of the valve clean.

6.Lubricate the o-rings with a waterproof lubricant available from your Caldera dealer.

7.Reassemble the valve and turn on power to the spa.

CARE OF THE EXTERIOR

SPA SHELL

Your Caldera® spa has a granite-like or smooth acrylic shell. Stains and dirt generally will not adhere to your spa’s surface. A soft rag or a nylon scrubber should easily remove most dirt. Most household chemicals are harmful to your spa’s shell. Watkins® Manufacturing Corp. recommends Soft Scrub® and Windex®. These are the only products which have passed the manufacturer’s tests. Sodium bicarbonate (baking soda) can also be used for minor surface cleaning. Always thoroughly rinse off any spa shell cleaning agent with fresh water.

SERVICE NOTES:

1.Iron and copper in the water can stain the spa shell if allowed to go unchecked. Ask your Caldera dealer for a stain and scale Inhibitor to use if your spa water has a high concentration of dissolved minerals.

2.The use of alcohol or any household cleaners other than those listed to clean the spa shell surface is NOT recommended. DO NOT use any cleaning products containing abrasives or solvents since they may damage the shell surface. NEVER USE HARSH CHEMICALS! Damage to the shell by the use of harsh chemicals is not covered under the warranty.

IMPORTANT: Some surface cleaners contain eye and skin irritants. Keep all cleaners out of the reach of children and use care when applying.

CARE OF THE SPA COVER

WARNING: The cover is a manual safety cover that meets or exceeds all prevailing requirements of ASTM Standards for spa safety covers when installed and used correctly as of the date of manufacture. Non-secured or improperly secured covers are a hazard. Open the cover to its fully open position before use.

VINYL COVER

The vinyl spa cover is an attractive, durable foam insulation product. Monthly cleaning and conditioning are recommended to maintain its beauty.

To clean and condition the vinyl cover:

1.Remove the cover from the spa and gently lean it against a wall or fence.

2.With a garden hose, spray the cover to loosen and rinse away dirt or debris.

3.Using a large sponge and/or a soft bristle brush, and using a very mild soap solution (1 teaspoon dishwashing liquid with 2 gallons of water) or baking soda (sodium bicarbonate), scrub the vinyl top in a circular motion. Do not let the vinyl dry with a soap film on it before it can be rinsed clean.

4.Scrub the cover’s perimeter and side flaps. Rinse clean with water.

5.Rinse off the underside of the cover with water only (use no soap), and wipe it clean with a dry rag.

SERVICE NOTE: To remove tree sap, use cigarette lighter fluid (not charcoal lighter fluid). Use sparingly, and rinse with a saddle soap solution immediately afterwards, then wipe dry.

Important reminders:

•DO remove snow buildup to avoid breakage of the foam core from the additional weight of the snow.

•DO lock cover lock straps to secure the cover when the spa is not in use.

•DO NOT drag or lift the spa cover using either the flaps or the cover lock straps.

•DO NOT walk, stand, or sit on the cover.

•DO NOT place any metal or heat transferring object on the cover or place any type of plastic tarp or drop cloth over the cover as this may result in a melted foam core, which would not be covered under the warranty.

•DO NOT use any lifting mechanisms, chemicals or cleaners except those recommended by Watkins® Manufacturing Corporation or its Authorized Sales and Service Dealer

22

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Highland Series Welcome to the growing family of Caldera Spa owners WelcomeTable of Contents Important Safety Instructions Safety InformationAvoiding the Risk to Children DON’TUnclean water Health problems affected by spa useRisks to Avoid Avoiding the Risk of HyperthermiaImportant SPA Instructions InstallationSite and Selection Preparation Deck Installation Outdoor and Patio InstallationINDOOR/BASEMENT Installation SPA Cover InstallationVolt Installation Electrical InstallationElectrical Requirements and Precautions Selecting the Voltage for Your SPAPermanently Connected Volt Subpanel Wiring InstructionsOperation Notes START-UP and Refill ProceduresOlympia Model OLY SPA FeaturesCumberland Model CUH Operating Instructions Temperature Lock Lock FeaturesManual Clean Cycle Mystique LED Lighting OptionalGeneral Information Water Quality and MaintenanceWatkins SPA Water Maintenance Program Methods for Testing the SPA WaterBasic Chemical Safety HOW to ADD Chemicals to the WaterMaintaining the Sanitizer Level Balancing the Calcium Hardness CHIf the CH is too low add CH Increaser Ideal pH level for your spa water isMonarch Water Care System Monarch Silver ION Purifier Installation InstructionsChlorine Sodium Dichlor Silver ION Questions and AnswersDOS and DON’TS Super ChlorinationBuilding a Sanitizer Routine Supplemental Water MaintenanceMonarch Ozone System Optional Cleaning the Ozone InjectorPurewatertm Ozone System Optional Common Water Chemistry Questions Question Why can’t I fill my spa with soft water?Water Terminology Problem Probable causes Solutions Filter Maintenance MaintenanceFilter Cartridge Removal and Cleaning Care of the SPA PillowsCare of the Exterior Diverter Valve MaintenanceCare of the SPA Cover SPA ShellDraining Your SPA Wood SPA Cabinet Standard Optional on Olympia & CumberlandWinterizing Your SPA Acts Invalidating Warranty ServiceWatkins Customer Service DisclaimersGeneral Operation Troubleshooting Guide SPA TroubleshootingPage Page Page Highland Series SPA Specifications

Highland Series specifications

The Caldera Highland Series is an exceptional line of outdoor gear designed specifically for adventurers who seek the perfect blend of performance, comfort, and durability. Crafted with a deep understanding of the challenges faced in various environments, this series stands out for its innovative technologies and user-centric features.

One of the hallmark characteristics of the Caldera Highland Series is its use of advanced waterproof yet breathable materials. The outer fabric is engineered with a cutting-edge membrane that effectively repels water, keeping the user dry in unexpected downpours. Furthermore, this membrane allows moisture from within to escape, ensuring that wearers remain comfortable during intense physical activity. This feature is invaluable for those trekking through diverse climates, providing both protection and breathability.

In addition to weather resistance, the Highland Series includes an innovative insulation technology. Utilizing lightweight yet efficient insulation means that users can stay warm without the bulk associated with traditional outerwear. This is particularly important for those who prioritize both warmth and mobility during outdoor excursions. Designed for layering, the Highland Series garments fit seamlessly with other layers, enhancing versatility for various conditions.

Another notable aspect of the Caldera Highland Series is its attention to detail in design. The garments boast articulated joints and ergonomic cuts, allowing for an unrestricted range of motion. This design philosophy is particularly beneficial for climbers, hikers, and skiers who need gear that moves with them rather than against them.

Additionally, the series embraces sustainability, incorporating recycled and eco-friendly materials into its production processes. By prioritizing responsible manufacturing practices, Caldera not only focuses on performance but also on environmental stewardship, appealing to the growing number of eco-conscious consumers.

Finally, the Highland Series is equipped with strategic pocket placements and functional features such as adjustable hoods and cuffs, ensuring practicality without sacrificing style. With a focus on performance-driven functionality, durable craftsmanship, and a commitment to sustainability, the Caldera Highland Series offers outdoor enthusiasts a premier choice for their adventures, no matter where the journey leads. Whether hiking rugged trails or navigating snowy slopes, this series equips you with the reliability and comfort needed to conquer the great outdoors.
Top Page Image Contents